Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

FireBrick IPsec Tunnel with Manual Keys (Deprecated)

From AAISP Support Site
Revision as of 11:06, 28 June 2013 by AA-Andrew (talk | contribs)

FireBrick to FireBrick

Here we will create a tunnel between 2 firebricks, Paul and Andrew. We will then set routing to route each others LAN blocks though the Tunnel. As the 2 endpoints have IPv6, we'll establish the tunnel over IPv6.

Side A Config

   <ipsec name="Andrew-ipsec" mtu="1500" graph="andrew-ipsec" local-ip="2001:8b0:d6:1::1" remote-ip="2001:8b0:1635::1" local-spi="4242" remote-spi="999" auth-algorithm="AES-XCBC" auth-key="1310B855522E8D457B814BD9DD78B6AB" crypt-algorithm="AES-CBC" crypt-key="0BC4DF636566667BEEC9F02117CB57C3" routes="90.155.90.128/27 2001:8b0:1635::/64"/>

Screenshot


IPSec settings overview
name Just a name for this Tunnel
mtu
graph Just a name so as to create a CQM graph
local-ip Our FireBrick IP to use as the source
remote-ip Remote FireBrick IP
local-spi
remote-spi
auth-algorithm
auth-key
crypt-algorithm
crypt-key
routes IP blocks to route through the tunnel - ie LAN IPs of the other end


name="Andrew-ipsec" mtu="1500" graph="andrew-ipsec" local-ip="2001:8b0:d6:1::1" remote-ip="2001:8b0:1635::1" local-spi="4242" remote-spi="999" auth-algorithm="AES-XCBC" auth-key="1310B855522E8D457B814BD9DD78B6AB" crypt-algorithm="AES-CBC" crypt-key="0BC4DF636566667BEEC9F02117CB57C3" routes="90.155.90.128/27 2001:8b0:1635::/64"/>

Side B Config

  <ipsec name="Paul-ipsec" mtu="1500" graph="paul-ipsec" local-ip="2001:8b0:1635::1" remote-ip="2001:8b0:d6:1::1" local-spi="999" remote-spi="4242" auth-algorithm="AES-XCBC" auth-key="1310B855522E8D457B814BD9DD78B6AB" crypt-algorithm="AES-CBC" crypt-key="0BC4DF636566667BEEC9F02117CB57C3" routes="91.241.56.1 81.2.97.160/27 91.241.56.0/24 2001:8b0:d6::/48"/>

Testing

These 2 FireBricks both happen to be on AAISP FTTC lines, and a normal traceroute would go via the AAISP router, but when the IPSec tunnel is enabled the traceroute goes direct.

Traceroute Before:

$ traceroute 91.241.56.1
traceroute to 91.241.56.1 (91.241.56.1), 30 hops max, 60 byte packets
 1  brick.h.hearn.org.uk (90.155.90.129)  0.344 ms  0.321 ms  0.310 ms
 2  a.gormless.thn.aa.net.uk (90.155.53.51)  11.703 ms  11.712 ms  11.834 ms
 3  brick.shibboleet.ltd.uk (91.241.56.1)  24.862 ms  24.871 ms  25.251 ms

Traceroute After:

$ traceroute 91.241.56.1
traceroute to 91.241.56.1 (91.241.56.1), 30 hops max, 60 byte packets
 1  brick.h.hearn.org.uk (90.155.90.129)  0.358 ms  0.342 ms  0.329 ms
 2  brick.shibboleet.ltd.uk (91.241.56.1)  26.178 ms  26.861 ms  27.123 ms

FireBrick to Linux