12,270
edits
DGA0122 Bridge Mode: Difference between revisions
m
no edit summary
mNo edit summary |
mNo edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
|
[[File:DGA0122-Bridge-status.png|thumb|Status boxes once Bridge mode is set]]
The DGA0122 can be configured manually to be a bridge.
#Reset the router, but keep the DSL cabl;e disconnected for the moment, as otherwise it may get auto-configured by A&A.
#Connect computer to one of the LAN ports, and it should obtain an IP address in the 192.168.1.x range
#click the i icon in the System Info' box▼
#Log in to the admin pages via http://192.168.1.1 - use admin and the Access Password from the base of the unit
▲#click the '''i''' icon in the top.left 'System Info' box
#Click the 'Configuration' tab
#Scroll down and click the 'Setup your Gateway
#Select the Type (ADSL or VDSL) as appropriate
#Set the 'Routed type' to
#Other settings should all be
#Click Save
In Bridge mode, only LAN ports 1-3 will be bridged - connect your PPPoE router to one of these ports. Port 4 and the WiFi will be used to access the device itself only. You may choose to disable the WiFi and change the LAN IP details as you wish.
| |||