Router - TG582N - WiFi: Difference between revisions

From AAISP Support Site
(Created page with "= Disable Wifi (Wireless) = Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply You can also press the wifi button on the router to enable/...")
 
(clean up)
 
(17 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Image:T582-small.png|link=:Category:Router TG582N|Got to Main TG582N Page]]
= Disable Wifi (Wireless) =

The TG582n supports 802.11b, g, and n with a single radio instance on 2.4 GHz. However its maximum speed on 802.11n appears to be 65Mbit/s, which
isn't much of an improvement over 802.11g.

= Disable WiFi (Wireless) =
Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply
Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply


You can also press the wifi button on the router to enable/disable the Wifi in the same way.
You can also press the WiFi button on the router to enable/disable the WiFi in the same way. Note that if you have configured multiple SSIDs (as per the next section) then the WiFi button on the router only enables/disables the first of the SSIDs (i.e. ssid_id = 0).

= Adding extra SSIDs =

The router only has one WiFi radio instance, but it is possible to configure up to 4
SSIDs on that radio instance. This can be useful in a number of scenarios:

* One has a single device which can only do WEP authentication, and one doesn't want to allow WEP for all devices
* One wishes to provide guest access, but the guests shouldn't have access to one's LAN
* One wishes to easily switch a WiFi client between two (or more) configurations

See http://web.archive.org/web/20160723055447/http://npr.me.uk/advdmz.html for instructions. Note that the ''any'' option controls broadcasting of the SSID.

==Other pages regarding this router==
<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl>


[[Category:Router TG582N|WiFi]]

Latest revision as of 00:19, 18 August 2018

Got to Main TG582N Page

The TG582n supports 802.11b, g, and n with a single radio instance on 2.4 GHz. However its maximum speed on 802.11n appears to be 65Mbit/s, which isn't much of an improvement over 802.11g.

Disable WiFi (Wireless)

Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply

You can also press the WiFi button on the router to enable/disable the WiFi in the same way. Note that if you have configured multiple SSIDs (as per the next section) then the WiFi button on the router only enables/disables the first of the SSIDs (i.e. ssid_id = 0).

Adding extra SSIDs

The router only has one WiFi radio instance, but it is possible to configure up to 4 SSIDs on that radio instance. This can be useful in a number of scenarios:

  • One has a single device which can only do WEP authentication, and one doesn't want to allow WEP for all devices
  • One wishes to provide guest access, but the guests shouldn't have access to one's LAN
  • One wishes to easily switch a WiFi client between two (or more) configurations

See http://web.archive.org/web/20160723055447/http://npr.me.uk/advdmz.html for instructions. Note that the any option controls broadcasting of the SSID.

Other pages regarding this router

<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl>