editor
698
edits
Router - ZyXEL P660R-D1: Difference between revisions
→top: clean up
(→top: clean up) |
|||
| (48 intermediate revisions by 2 users not shown) | |||
|
<indicator name="Front">[[File:Menu-B10D.svg|link=:Category:AA Routers|30px|Back up to the A&A Routers Page]]</indicator>
[[File:P660rd1.png]]
==Overview==
The ZyXEL P660R-D1 is a
{|class="wikitable"
|}
▲==Default Admin Username/Password==
{|class="wikitable"
!colspan="2"|Default/Factory Password
|1234
|-
!HTTP port:
!colspan="2"|AAISP configured Password▼
|80
|}
{|class="wikitable"
|-
!Username:
|admin
|-
!Password:
|printed on card, available from Control Pages.
|-
!HTTP port:
|80, or Printed on card
|}
Factory reset:
[[File:ZyXEL-660R-D1-Login.png|300px|none|frame|Login Screen]]▼
Hold in the RESET button for five seconds and then release it, then log in using default IP and password as above
==Basic Configuration for PPPoA==
This will cover BT, TT, BE lines.
[[File:BT-Zyxel.png|300px|PPPoA Settings screen|PPPoA Settings screen]]
==Bridge config==
ADSL modulation type: Multimode
[[File:Zyxel-bridge.png|300px|border|Config page]]
==Netbios Filter==
==Closing Open DNS==
*See: [[
[[Category:Router]]▼
==Closing WAN HTTP==
By default ZyXELs have their web interface open
Note: If you have a public IP then setting HTTP to LAN will still allow access from the internet to your LAN IP.
There are a couple of options for securing WAN HTTP access:
**Use this if the router does not have a public LAN IP and you want to block access from the Internet
**Use this option if you do want to have access to the interface from the Internet, but want a degree of security but obscuring the port used.
*'''Allow access from a specific single IP'''
**Use this to only allow access from a specific IP. This applies to the LAN side and the WAN side.
===Changing Web Interface port from the Control Pages===
Advanced - Remote MGMT - WWW - LAN▼
You are able to change the port from the Control Pages. Log in, click on the Line, and then the Router Settings button.
From this page, you can pick which port you'd like it to be set to, and the system will attempt to change it for you.
[[File:Clueless-zyxelport.png|none|frame|Web Interface setting on the Control Page]]
===Changing Web Interface port via the Web Interface===
The port can be changed from within the routers's web interface. The setting is found on the web interface under:
[[File:ZyXEL-660R-D1-HTTP.png|none|frame|HTTP Options screen. Here you can enable/disable LAN access and change the port]]
===Changing Web Interface port via Telnet===
View the current access settings (for all services)
sys server load
sys server disp
Set the type of access:
sys server load
sys server access web 0
sys save
Note: Allowed access type: 0:ALL, 1:None, 2:LAN IP only, 3:WAN IP only
Set the Port
sys server load
sys server port web 78262
sys save
==ZyXEL Web Interface port on configured routers==
From January 2013, ZyXELs will be have a random port number for the web interface. This will be printed on plastic card supplied with the router. The port number can also be seen from the
Control pages by clicking on the Line.
[[File:ZyXEL-660R-D1-HTTPPort.png|none|frame|Port number as on Control Pages]]
The port can also be changed from the Control Pages, see above for details.
=Old ZyXEL Prestige 660R-61C Router=
Here are some notes on the legacy (very old) Prestige 660R-61C ZyXEL router:
The HTTP port on some C1 routers can be changed from the web interface (Under Advanced, Remote Management) ot via telnet (Menu 24 then 11)
[[File:660c-remotemanagement.png|none|frame|Remote Management Options on Older ZyXEL Router]]
| |||