12,270
edits
Router - ZyXEL P660R-D1: Difference between revisions
m
→Admin Username/Password
| (19 intermediate revisions by 2 users not shown) | |||
|
<indicator name="Front">[[File:Menu-B10D.svg|link=:Category:AA Routers|30px|Back up to the A&A Routers Page]]</indicator>
[[File:P660rd1.png]]
!Password:
|1234
|-
!IP:
|192.186.1.1
|-
!HTTP port:
|}
Factory reset:
Hold in the RESET button for five seconds and then release it, then log in using default IP and password as above
[[File:ZyXEL-660R-D1-Login.png|none|200px|frame|Login Screen]]
This will cover BT, TT, BE lines.
[[File:BT-Zyxel.png|300px|PPPoA Settings screen|PPPoA Settings screen]]
==Bridge config==
ADSL modulation type: Multimode
[[File:Zyxel-bridge.png|300px|border|Config page]]
==Netbios Filter==
==Closing Open DNS==
*See: [[
[[Category:Router]]▼
==Closing WAN HTTP==
From this page, you can pick which port you'd like it to be set to, and the system will attempt to change it for you.
[[File:Clueless-zyxelport.png|none|frame|Web Interface setting on the Control Page]]
===Changing Web Interface port via the Web Interface===
The port can also be changed from the Control Pages, see above for details.
=Old ZyXEL Prestige 660R-61C Router=
Here are some notes on the legacy (very old) Prestige 660R-61C ZyXEL router:
The HTTP port on some C1 routers can be changed from the web interface (Under Advanced, Remote Management) ot via telnet (Menu 24 then 11)
[[File:660c-remotemanagement.png|none|frame|Remote Management Options on Older ZyXEL Router]]
| |||