12,270
edits
Router - ZyXEL P660R-D1: Difference between revisions
m
→Closing WAN HTTP
|
==Closing WAN HTTP==
By default ZyXELs have their web interface open to the LAN IP and the WAN IP. This can be changed on the web interface to only allow access to the LAN IP.
There are a couple of options for securing WAN HTTP access:
#Only Allow Access to the LAN IP
##Use this if the router does not have a public LAN IP and you want to block access from the Internet
#Allow access to the LAN IP and WAN IP but use a different Port
##Use this option if you do want to have access to the interface from the Internet, but want a degree of security but obscuring the port used.
#Allow access from a specific single IP
##Use this to only allow access from a specific IP. This applies to the LAN side and the WAN side.
The setting is found on the web interface under:
Advanced -> Remote MGMT -> WWW -> LAN▼
| |||