|
There are a couple of options for securing WAN HTTP access:
#*Only Allow Access to the LAN IP
**Use this if the router does not have a public LAN IP and you want to block access from the Internet
#*Allow access to the LAN IP and WAN IP but use a different Port
##**Use this option if you do want to have access to the interface from the Internet, but want a degree of security but obscuring the port used.
#*Allow access from a specific single IP
##**Use this to only allow access from a specific IP. This applies to the LAN side and the WAN side.
The setting is found on the web interface under:
| 