Router - ZyXEL P660R-D1

From AAISP Support Site

P660rd1.png

Overview

The ZyXEL P660R-D1 is a nice little ADSL router, ideal for sites that have their own firewall router. It can be configured for routing or bridging.

LED Status
Steady Flashing Blink Off
Power Power on Power off
Ethernet
DSL In Sync Attempting sync Traffic No Sync
Internet PPP down PPP online


Default Admin Username/Password

Default/Factory Password
Username: admin
Password: 1234
AAISP configured Password
Printed on card with router


Basic Configuration for PPPoA

This will cover BT, TT, BE lines.

 

Bridge config

To configure the ZyxEL as a bridge, the settings to use are as follows, and these settings are set in:

Network > WAN > Internet Connection

Also see the screenshot below:

Name: AAISP (But can be anything)
Mode: Bridge
Encapsulation: RFC 1483
Multiplexing: LLC (VC may work on 20cn, but stick with LLC)
VPI: 0
VCI: 38
ADSL modulation type: Multimode

 

Netbios Filter

Closing Open DNS

Closing WAN HTTP

By default ZyXELs have their web interface open to the LAN and the WAN. This can be changed on the web interface to only allow access from the LAN.

There are a couple of options for securing WAN HTTP access:

  1. Only Allow Access From the LAN
  2. Allow LAN and WAN access but use a different Port
Advanced - Remote MGMT - WWW - LAN
 
Login Screen


 
HTTP Options