Stopping Open DNS - ZyXEL P660R-D1: Difference between revisions

From AAISP Support Site
No edit summary
(→‎See also: clean up)
 
(17 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:P660rd1.png|link=Router - ZyXEL P660R-D1]]
[[File:P660rd1.png|link=Router - ZyXEL P660R-D1]]


The factory setting for this router is for DNS to be open on the WAN. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS will need to be disabled. This can be done from the web interface and '''setting DNS Access Status to LAN'''. Go to:
The factory setting for this router on older firmware is for DNS to be open on the WAN IP as well as the LAN IP. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS may need to be disabled.
> Advanced - Remote MGMT - DNS - LAN


=Changing DNS Settings via the Web Interface=
[[File:Zyxeld1-opendns-3.png]]


This can be done from the web interface and '''setting DNS Access Status to LAN'''. Go to:
==What is the IP address of the router?==
> Advanced - Remote MGMT - DNS
Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the IP address.


Then re-test from the Control Pages: https://clueless.aa.net.uk/dnsresolvers.cgi
==What is the admin username and password==
Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the password. On the ZyXEL the username is admin.


[[File:Zyxeld1-opendns-3.png]]
==Unable to get to the web interface?==
If you are unable to get to the web interface, then try turning the router off and on again.


The LAN/WAN here are relating to the LAN/WAN IP addresses, not the LAN/WAN interfaces.


==Changing this via Telnet==
=Changing DNS Settings via Telnet=
If you still can't access the router web pages, then you can do this via telnet by running the following commands:
If you still can't access the router web pages, then you can do this via telnet by running the following commands:

View the current access settings (for all services)
sys server load
sys server disp

To make the change to the access:


sys server load
sys server load
sys server access dns 2
sys server access dns 1
sys save
sys save


Note: Allowed access type: 0:ALL, 1:None, 2:LAN IP only, 3:WAN IP only

=FAQ=

==The DNS checker is saying DNS is still open==
If you have publicly routed IP addresses on the LAN side of the router then you may wish to disable the resolver completely instead of restricting it to the LAN IP, as the LAN IPs will be still be accessible from the outside world.

==What is the IP address of the router?==
Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the IP address.

==What is the admin username and password?==
Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the password. On the ZyXEL the username is admin.

==I am Unable to get to the web interface?==
Sometimes the webserver on the router stops working, try turning the router off and on again.


==Does this apply to other routers?==
This also applies to the P-660HW-T1 v2 Router
This also applies to the P-660HW-T1 v2 Router, and probably other ZyXELs


==Also see:==
==See also==
*[[:Category:Open DNS Resolvers]]
*[[Router_-_ZyXEL_P660R-D1]]
*[[Router - ZyXEL P660R-D1]]


[[Category:Open DNS Resolvers]]
[[Category:Open DNS Resolvers]]
[[Category:Router]]
[[Category:AA Routers]]
[[Category:3rd Party Routers]]

Latest revision as of 23:59, 17 August 2018

P660rd1.png

The factory setting for this router on older firmware is for DNS to be open on the WAN IP as well as the LAN IP. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS may need to be disabled.

Changing DNS Settings via the Web Interface

This can be done from the web interface and setting DNS Access Status to LAN. Go to:

> Advanced - Remote MGMT - DNS

Then re-test from the Control Pages: https://clueless.aa.net.uk/dnsresolvers.cgi

Zyxeld1-opendns-3.png

The LAN/WAN here are relating to the LAN/WAN IP addresses, not the LAN/WAN interfaces.

Changing DNS Settings via Telnet

If you still can't access the router web pages, then you can do this via telnet by running the following commands:

View the current access settings (for all services)

sys server load
sys server disp

To make the change to the access:

sys server load 
sys server access dns 1 
sys save

Note: Allowed access type: 0:ALL, 1:None, 2:LAN IP only, 3:WAN IP only

FAQ

The DNS checker is saying DNS is still open

If you have publicly routed IP addresses on the LAN side of the router then you may wish to disable the resolver completely instead of restricting it to the LAN IP, as the LAN IPs will be still be accessible from the outside world.

What is the IP address of the router?

Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the IP address.

What is the admin username and password?

Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the password. On the ZyXEL the username is admin.

I am Unable to get to the web interface?

Sometimes the webserver on the router stops working, try turning the router off and on again.

Does this apply to other routers?

This also applies to the P-660HW-T1 v2 Router, and probably other ZyXELs

See also