Stopping Open DNS - ZyXEL P660R-D1: Difference between revisions

Revision as of 08:57, 27 June 2013

The factory setting for this router is for DNS to be open on the WAN. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS will need to be disabled. This can be done from the web interface and setting DNS Access Status to LAN. Go to:

Advanced - Remote MGMT - DNS - LAN Only

Or from the CLI (telnet):

sys server load 
sys server access dns 2 
sys save

This also applies to the P-660HW-T1 v2 Router

Also see:

Router_-_ZyXEL_P660R-D1

@@ Line 1: / Line 1: @@
 [[File:P660rd1.png|link=Router - ZyXEL P660R-D1]]
-The factory setting for this router is for DNS to be open on the WAN. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS will need to be disabled. This can be done from the web interface and '''setting DNS to WAN Only'''. Go to:
+The factory setting for this router is for DNS to be open on the WAN. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS will need to be disabled. This can be done from the web interface and '''setting DNS Access Status to LAN'''. Go to:
  Advanced - Remote MGMT - DNS - LAN Only