VMG1312-B10A: AAISP Configuration: Difference between revisions

From AAISP Support Site
mNo edit summary
mNo edit summary
Line 7: Line 7:
{| class="wikitable sortable"
{| class="wikitable sortable"
|-
|-
!Setting !!Note !!Date added
!!Area !Setting !!Note !!Date added
|-
|-
| Configure WAN interface || (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) || 2015-02-01
| WAN || Configure WAN interface || (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) || 2015-02-01
|-
|-
| Configure PPP || settings as per the service || 2015-02-01
| WAN || Configure PPP || settings as per the service || 2015-02-01
|-
|-
| Configure DHCP || (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) || 2015-02-01
| LAN || Configure DHCP || (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) || 2015-02-01
|-
|-
| Configure LAN subnet || if line has a block of public IPs. (else default is 192.168.1.1) || 2015-02-01
| LAN || Configure LAN subnet || if line has a block of public IPs. (else default is 192.168.1.1) || 2015-02-01
|-
|-
| Configure WiFi || Further Settings on Control Pages: SSID, Password or disable WiFi || 2015-02-01
| WiFi || Configure WiFi || Further Settings on Control Pages: SSID, Password or disable WiFi || 2015-02-01
|-
|-
| Configure WiFi for 20Mhz || instead of the 40Mhz default see [[VMG1312: WiFi Tips]] || 2015-02-01
| WiFi || Configure WiFi for 20Mhz || instead of the 40Mhz default see [[VMG1312: WiFi Tips]] || 2015-02-01
|-
|-
| Configure WiFi for AES only|| This disables legacy/insecure TKIP see [[VMG1312: WiFi Tips]] || 2015-06-16
| WiFi || Configure WiFi for AES only|| This disables legacy/insecure TKIP see [[VMG1312: WiFi Tips]] || 2015-06-16
|-
|-
| Configure Firewall on/off || Settings on Control Pages, Default=Enabled || 2015-02-01
| Firewall || Configure Firewall on/off || Settings on Control Pages, Default=Enabled || 2015-02-01
|-
|-
| Configure TR-069 || so the router can be managed by AAISP, we give customer the same controls as staff get || 2015-02-01
| TR-069 || Configure TR-069 || so the router can be managed by AAISP, we give customer the same controls as staff get || 2015-02-01
|-
|-
| Configure Local logging || to log: System, PPPoE, XDSL, Internet, Attack, Account. || 2015-05-29
| Log || Configure Local logging || to log: System, PPPoE, XDSL, Internet, Attack, Account. || 2015-05-29
|-
|-
| Add a Firewall rule to allow ICMPv6 to LAN || Helps make IPv6 work! ||2015-06-16
| Firewall || Add a Firewall rule to allow ICMPv6 to LAN || Helps make IPv6 work! ||2015-06-16
|-
|-
| Disable NAT || if customer has a public IP block || 2015-02-01
| LAN || Disable NAT || if customer has a public IP block || 2015-02-01
|-
|-
| Disable SNMP || || 2015-02-01
| Services || Disable SNMP || || 2015-02-01
|-
|-
| Disable 3G backup || || 2015-02-01
| Services || Disable 3G backup || || 2015-02-01
|-
|-
| Disable 'DoS Protection Blocking' || as it does odd things, like blocking WebUI over WiFi || 2015-06-16
| Firewall || Disable 'DoS Protection Blocking' || as it does odd things, like blocking WebUI over WiFi || 2015-06-16
|-
|-
| Change NTP servers || to be time.aa.net.uk and 0.uk.pool.ntp.org || 2015-02-01
| Services || Change NTP servers || to be time.aa.net.uk and 0.uk.pool.ntp.org || 2015-02-01
|-
|-
| Change 'supervisor' password || Setting on Control Pages || 2015-02-01
| Users || Change 'supervisor' password || Setting on Control Pages || 2015-02-01
|-
|-
| Change 'admin' password || Setting on Control Pages || 2015-02-01
| Users || Change 'admin' password || Setting on Control Pages || 2015-02-01
|-
|-
| Change Remote Management Options || Further Settings on Control Pages || 2015-02-01
| Firewall || Change Remote Management Options || Further Settings on Control Pages || 2015-02-01
|-
|-
| Change QoS || to give upstream priority based on 'Packet Length' See: [[VMG1312: QoS]] || 2015-02-01
| QoS || Change QoS || to give upstream priority based on 'Packet Length' See: [[VMG1312: QoS]] || 2015-02-01
|-
|-
| Change 'Deny Ping Response' to Disable, || to allow the router to reply to ping. || 2015-02-01
| Firewall || Change 'Deny Ping Response' to Disable, || to allow the router to reply to ping. || 2015-02-01
|-
|-
| Disable the default QoS Classes || See: [[VMG1312: QoS]] || 2015-02-01
| QoS || Disable the default QoS Classes || See: [[VMG1312: QoS]] || 2015-02-01
|-
|-
| Remove the default read-only zyuser user || || 2015-02-01
| User || Remove the default read-only zyuser user || || 2015-02-01
|}
|}



Revision as of 20:13, 17 June 2015

AAISP configure routers via TR-069 protocol. We generate a config file and this is sent to the router. Firmware updates are also able to be sent to the router.

Customers are free to alter the configuration as supplied, sending a configuration from the Control Pages will overwrite any settings changed though.

Here is an overview of the settings that are modified from the default, you can sort the table by the date added column to see any new changes.

!Area !Setting Note Date added
WAN Configure WAN interface (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) 2015-02-01
WAN Configure PPP settings as per the service 2015-02-01
LAN Configure DHCP (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) 2015-02-01
LAN Configure LAN subnet if line has a block of public IPs. (else default is 192.168.1.1) 2015-02-01
WiFi Configure WiFi Further Settings on Control Pages: SSID, Password or disable WiFi 2015-02-01
WiFi Configure WiFi for 20Mhz instead of the 40Mhz default see VMG1312: WiFi Tips 2015-02-01
WiFi Configure WiFi for AES only This disables legacy/insecure TKIP see VMG1312: WiFi Tips 2015-06-16
Firewall Configure Firewall on/off Settings on Control Pages, Default=Enabled 2015-02-01
TR-069 Configure TR-069 so the router can be managed by AAISP, we give customer the same controls as staff get 2015-02-01
Log Configure Local logging to log: System, PPPoE, XDSL, Internet, Attack, Account. 2015-05-29
Firewall Add a Firewall rule to allow ICMPv6 to LAN Helps make IPv6 work! 2015-06-16
LAN Disable NAT if customer has a public IP block 2015-02-01
Services Disable SNMP 2015-02-01
Services Disable 3G backup 2015-02-01
Firewall Disable 'DoS Protection Blocking' as it does odd things, like blocking WebUI over WiFi 2015-06-16
Services Change NTP servers to be time.aa.net.uk and 0.uk.pool.ntp.org 2015-02-01
Users Change 'supervisor' password Setting on Control Pages 2015-02-01
Users Change 'admin' password Setting on Control Pages 2015-02-01
Firewall Change Remote Management Options Further Settings on Control Pages 2015-02-01
QoS Change QoS to give upstream priority based on 'Packet Length' See: VMG1312: QoS 2015-02-01
Firewall Change 'Deny Ping Response' to Disable, to allow the router to reply to ping. 2015-02-01
QoS Disable the default QoS Classes See: VMG1312: QoS 2015-02-01
User Remove the default read-only zyuser user 2015-02-01
  • Static routes are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though.

This list may not be exhaustive, and may change over time.