VMG1312-B10A: Firewall: Difference between revisions
(Created page with "The default firewall state for IPv4 and IPv6 would be enabled. This can be disabled via the AAISP control pages. Rules can be added as required. The firewall is configured S...") |
(No difference)
|
Revision as of 21:15, 18 May 2015
The default firewall state for IPv4 and IPv6 would be enabled. This can be disabled via the AAISP control pages. Rules can be added as required.
The firewall is configured
Security -> Firewall -> Access Control
You don't need to create any special 'protocol' lists, you can simply enter in the Target IP/Port etc in to the rule.