View source for Router - ZyXEL P660R-D1

[[File:P660rd1.png]]

==Overview==
The ZyXEL P660R-D1 is a little ADSL router, ideal for sites that have their own firewall router. It can be configured for routing or bridging.

{|class="wikitable"
!colspan="5"|LED Status
|-
!
!Steady
!Flashing
!Blink
!Off
|-
!Power
|Power on
|
|
|Power off
|-
!Ethernet
|
|
|
|
|-
!DSL
|In Sync
|Attempting sync
|Traffic
|No Sync
|-
!Internet
|PPP down
|
|
|PPP online
|}

==Admin Username/Password==
{|class="wikitable"
!colspan="2"|Default/Factory Password
|-
!Username: 
|admin
|-
!Password: 
|1234
|-
!HTTP port: 
|80
|}

{|class="wikitable"
!colspan="2"|AAISP Configured Password
|-
!Username: 
|admin
|-
!Password: 
|printed on card, available from Control Pages.
|-
!HTTP port:
|80, or Printed on card
|}


[[File:ZyXEL-660R-D1-Login.png|none|200px|frame|Login Screen]]

==Basic Configuration for PPPoA==

This will cover BT, TT, BE lines.

[[File:BT-Zyxel.png|300px|PPPoA Settings screen|PPPoA Settings screen]]

==Bridge config==

To configure the ZyxEL as a bridge, the settings to use are as follows, and these settings are set in:
 Network > WAN > Internet Connection

Also see the screenshot below:

 Name: AAISP (But can be anything)
 Mode: Bridge
 Encapsulation: RFC 1483
 Multiplexing: LLC (VC may work on 20cn, but stick with LLC)
 VPI: 0
 VCI: 38
 ADSL modulation type: Multimode

[[File:Zyxel-bridge.png|300px|Config page]]

==Netbios Filter==
*See: [[ZyXEL P660R-D1 - Netbios Filter]]

==Closing Open DNS==
*See: [[Stopping_Open_DNS_-_ZyXEL_P66R-D1]]

[[Category:Router]]

==Closing WAN HTTP==
By default ZyXELs have their web interface open on the LAN IP and the WAN IP. This can be changed on the web interface to only allow access to the LAN IP.

Note: If you have a public IP then setting HTTP to LAN will still allow access from the internet to your LAN IP.

There are a couple of options for securing WAN HTTP access:

*'''Only Allow Access to the LAN IP'''
**Use this if the router does not have a public LAN IP and you want to block access from the Internet
*'''Allow access to the LAN IP and WAN IP but use a different Port'''
**Use this option if you do want to have access to the interface from the Internet, but want a degree of security but obscuring the port used. 
*'''Allow access from a specific single IP'''
**Use this to only allow access from a specific IP. This applies to the LAN side and the WAN side.

===Changing Web Interface port from the Control Pages===
You are able to change the port from the Control Pages. Log in, click on the Line, and then the Router Settings button.

From this page, you can pick which port you'd like it to be set to, and the system will attempt to change it for you.

[[File:Clueless-zyxelport.png|none|frame|Web Interface setting on the Control Page]]

===Changing Web Interface port via the Web Interface===

The port can be changed from within the routers's web interface. The setting is found on the web interface under:

 Advanced -> Remote MGMT -> WWW

[[File:ZyXEL-660R-D1-HTTP.png|none|frame|HTTP Options screen. Here you can enable/disable LAN access and change the port]]

===Changing Web Interface port via Telnet===

View the current access settings (for all services)
 sys server load
 sys server disp

Set the type of access:
 sys server load
 sys server access web 0
 sys save

Note: Allowed access type: 0:ALL, 1:None, 2:LAN IP only, 3:WAN IP only

Set the Port
 sys server load
 sys server port web 78262
 sys save

==ZyXEL Web Interface port on configured routers==
From January 2013, ZyXELs will be have a random port number for the web interface. This will be printed on plastic card supplied with the router. The port number can also be seen from the 
Control pages by clicking on the Line.

[[File:ZyXEL-660R-D1-HTTPPort.png|none|frame|Port number as on Control Pages]]

The port can also be changed from the Control Pages, see above for details.