Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

VMG1312-B10A: Factory Reset: Difference between revisions

← Older edit
Content deleted Content added
Reedy (talk | contribs)
editor
706 edits
More bash
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,616 edits
 
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Overview==
There are 4 configuration settings that the router can be in:
There are 4 configuration settings that the router can be in:


Line 24: Line 23:


#Switch router on, wait for it to boot up
#Switch router on, wait for it to boot up
#With a paperclip, pen, etc, hold in the reset button
#With a paperclip, pen, etc., hold in the reset button
#Wait until the power light turns red (should be up to 5 seconds)
#Wait until power flashes red, keep holding it down until power stops flashing.
#Release the reset button
#Release the reset button
#Wait for the router to boot up again
#Wait for the router to boot up again
Line 91: Line 90:
bftpd:error:341.231:cmsImg_validateImage:1514:Could not determine image format [72063 bytes]
bftpd:error:341.231:cmsImg_validateImage:1514:Could not determine image format [72063 bytes]
Then this will be due to the Firmware version not matching the version that the config file was made for. See the [[VMG1312: Software|Software Page]] for information about the software versions.
Then this will be due to the Firmware version not matching the version that the config file was made for. See the [[VMG1312: Software|Software Page]] for information about the software versions.
[[Category:ZyXEL_VMG1312|Reset]]
[[Category:ZyXEL VMG1312-B10A|Reset]]
Retrieved from "http://support.aa.net.uk/VMG1312-B10A:_Factory_Reset"