FireBrick 2700 Replace PSU: Difference between revisions
(Some images) |
(→top: clean up, typos fixed: in it's → in its) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Sometimes, the PSU inside the FireBrick 2700 does fail. And you have to replace it... |
Sometimes, the PSU inside the FireBrick 2700 does fail. And you have to replace it... |
||
::: [[File:FB2700 Case with Top Screws.JPG|200px]] |
|||
# Remove all the screw from the top of the case |
# Remove all the screw from the top of the case |
||
#: [[File:FB2700 Case without Top Screws.JPG|200px]] |
#: [[File:FB2700 Case without Top Screws.JPG|200px]] |
||
# Remove the lid |
# Remove the lid |
||
#: [[File:FB2700 Case with Top Removed.JPG|200px]] |
#: [[File:FB2700 Case with Top Removed.JPG|200px]] |
||
# Flip the |
# Flip the FireBrick over and remove both the screws from the front of the case |
||
# Remove the front fascia |
# Remove the front fascia |
||
| ⚫ | |||
#: [[File:FB2700_PSU_Pulled_from_Case.JPG|200px]] |
|||
# Unplug the green power cable from the PCB |
# Unplug the green power cable from the PCB |
||
#: [[File:FB2700 PSU removed from Case.JPG|200px]] |
|||
| ⚫ | |||
# Connect the green power cable from the new PSU to the PCB (now we're just going backwards over the same steps) |
|||
# Put the new PSU in it's position |
|||
# |
# Put the new PSU in its correct position in the FireBrick case |
||
# Put the front fascia back in place and screw it in |
# Put the front fascia back in place and screw it in |
||
# Put the top cover back on and replace all the screws |
# Put the top cover back on and replace all the screws |
||
Latest revision as of 23:54, 17 August 2018
Sometimes, the PSU inside the FireBrick 2700 does fail. And you have to replace it...
- Remove all the screw from the top of the case
- Remove the lid
- Flip the FireBrick over and remove both the screws from the front of the case
- Remove the front fascia
- Remove the old PSU from the case
- Unplug the green power cable from the PCB
- Connect the green power cable from the new PSU to the PCB (now we're just going backwards over the same steps)
- Put the new PSU in its correct position in the FireBrick case
- Put the front fascia back in place and screw it in
- Put the top cover back on and replace all the screws
