B10D Software: Difference between revisions

Latest revision as of 14:54, 28 Haziran 2019

Software History

Software on the ZyXEL web site may well be older than the version that we are using. Here are the details regarding software releases: (Latest first)

ZyXEL VMG1312 Software releases
Released to Customers	Version	Release	Download	Open Source	Information
2019-06	V5.13(AAXA.8)C0	5	.zip	On request from ZyXEL	New GUI IPv6 fixes
2017-06	V5.13(AAXA.5)C0	5	.zip	On request from ZyXEL	The First Software A&A used Issue: Downgrade FW from V5.13 to V5.11 will reset to default setting.

Software Notes

Usually applying the firmware yourself to an AAISP supplied router is not required or recommended. Updates can be applied via the Control Pages. The files are listed above for your information as they also include the release notes.
Where possible we will request and the GPL'd software used and will add it to the table above, you may request it via ZyXEL GPL Page
ZyXEL host firmware for this router here: ftp://ftp.zyxel.com/VMG1312-B10D/firmware/

Manual Upgrading

Unzip the downloaded file. Log in to the router's web interface, go to:

Maintenance > Firmware Upgrade

and follow the steps there, you'll be uploading the .bin file.

Control Page options for upgrading software

The control page will show if the current software version on the router and if it is up to date or not. If there is a new software version available then it can be upgraded:

Router action buttons. Upgrade button is only shown if a new version is available

Upgrading when in Bridge mode

When in bridge mode the ZyXEL router will not have access to the internet itself, and so won't have a way to upgrade in this state. To upgrade you need to reset the router by holding in the reset button. This then reverts the config back to our default, it will then log in, upgrade, then log in again and will get a new config sent to it. At that point it will be back to Bridge mode running latest software.

@@ Line 8: / Line 8: @@
 |+ZyXEL VMG1312 Software releases
 |-
-! Date !! Version !! Live !! Download !! Open Source !! Information
+! Released to Customers !! Version !! Release !! Download !! Open Source !! Information
 |-
+| 2019-06 || V5.13(AAXA.8)C0 ||5|| [ftp://ftp.zyxel.com/VMG1312-B10D/firmware/VMG1312-B10D_5.13(AAXA.8)C0.zip .zip] || [http://www.zyxel.com/form/gpl_oss_software_notice.shtml On request from ZyXEL] ||
-| 2017-06 || V5.13(AAXA.5)C0 (Release 5) ||Yes||  || unknown || The First Software A&A used
+*New GUI
+*IPv6 fixes
+|-
+| 2017-06 || V5.13(AAXA.5)C0 ||5|| [ftp://ftp.zyxel.com/VMG1312-B10D/firmware/VMG1312-B10D_5.13(AAXA.5)C0.zip .zip] || [http://www.zyxel.com/form/gpl_oss_software_notice.shtml On request from ZyXEL] ||
+*The First Software A&A used
+*Issue: Downgrade FW from V5.13 to V5.11 will reset to default setting.
 |}
+==Software Notes==
 *Usually applying the firmware yourself to an AAISP supplied router is not required or recommended. Updates can be applied via the Control Pages. The files are listed above for your information as they also include the release notes.
-*The 'Live' flag shows which version is currently being shipped by AAISP and will be sent to a router that has been factory reset.
-*2015-07-17: We have been told "The scope for AAJZ7 [release 7] is already in discussion and we are pushing to get as many of A&A’s open tickets in to it"
-*The configuration file that we generate for your line will be based upon the 'live' software version. This means that if a router is running older software it will need to be upgraded before a new configuration can be sent.
-*See the [[VMG1312: Bugs]] page for problems we have found with the software and configuration.
 *Where possible we will request and the GPL'd software used and will add it to the table above, you may request it via [http://www.zyxel.com/form/gpl_oss_software_notice.shtml ZyXEL GPL Page]
 *ZyXEL host firmware for this router here: ftp://ftp.zyxel.com/VMG1312-B10D/firmware/
@@ Line 25: / Line 29: @@
 Log in to the router's web interface, go to:
  Maintenance > Firmware Upgrade
-and follow the steps there, you'll be uploading the .rom file.
+and follow the steps there, you'll be uploading the .bin file.
 ==Control Page options for upgrading software==