VMG1312-B10A: QoS: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 5:

The examples below are when using the VMG1312 in router mode on a FTTC line. The VMG1312 is plugged directly in to the phone line (via a SSFP), and providing a firewalled, no-nat and DHCP connection to the LAN.

The QoS settings on the VMG1312 will control the upload traffic. Download is already ~~handle led~~ at the AAISP side where we give priority to small packets as well as the option to rate limit the line slightly to improve performance.

The QoS settings on the VMG1312 will control the upload traffic. Download is already handled at the AAISP side where we give priority to small packets as well as the option to rate-limit the line slightly to improve performance.

==The ~~affect~~ of disabling QoS==

==The effect of disabling QoS==

Here we are running a backup job, an rsync (over ssh). Just after 7am QoS is disabled for around 30 minutes. The latency (blue) immediately jumps up to an average of 350ms. It was less than 20ms with QoS enabled.

[[File:ZyXEL-VMG1312-Qos-OnOff-CQM.png|none|frame|Standard QoS enabled, then disabled, then enabled]]

==Problems with default settings==

Line 29:

Line 28:

==Customer Feedback==

We welcome any customer feedback as to these QoS settings. We're happy for customers to modify their config if they would like, but these settings would get overwritten if a config is ever ~~send~~ from the AAISP side to the router.

We welcome any customer feedback as to these QoS settings. We're happy for customers to modify their config if they would like, but these settings would get overwritten if a config is ever sent from the AAISP side to the router.

[[Category:ZyXEL VMG1312-B10A|QoS]]