Latest revision as of 07:41, 16 December 2021

The ZyXEL VMG1312-B10D is the successor to the VMG1312-B10A. It is the default router supplied by AAISP from the summer of 2017. It is the younger sibling of the VMG3925, you can see more differences on the VMG1312 Vs VMG3925 page.

Quick Start

Guide with how to plug in and what the LEDs mean

Further Documents

Manuals and other documentation for the router

Settings & Configuration

Information about how A&A configure the router and what settings are available to customers

Software

Software information and downloads

Summary

The ZyXEL VMG1312 (VMG1312-B10D) is an all-in-one ADSL/VDSL router with WiFi and 4 network ports. AAISP started supplying these in July 2017, these are now the default router.

Basic Specs:

4x 10/100M ports.
Modem supports VDSL (FTTC) and ADSL/ADSL2.
WiFi is 2.4 GHz, 802.11 b/g/n
Broadcom 63381 chipset
MTU 1500 when in bridge mode not possible yet, but we are working with ZyXEL on this. (2017-11)

Suitable for

ADSL1
ADSL2
VDSL (FTTC) as an ethernet router plugged in to a VDSL modem (no longer a common setup, as Openreach no longer provide VDSL modems)
VDSL (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick). ~~(with baby jumbo frame support, therefore supporting 1500 byte MTU)~~
FTTP using an ethernet WAN port doing PPPoE.

Security Advisories

ZyXEL have a page with their Security Advisories: https://www.zyxel.com/support/security_advisories.shtml

Factory Default Admin Username/Password

Note: An AAISP configured router will have a different username and password.

Default/Factory Password
IP:	192.168.1.1
Username:	admin
Password:	1234 (Some routers will be issued with the password 'aaisp1234')

Supervisor password:

The VMG1312 has an autogenerated supervisor password (hashed from the serial number) - however you can read /etc/passwd from the device as the admin user via SSH - you'll need to crack the hash (e.g. with hashcat), the password will be 8 characters long using characters 0-9,a-f (lower case)

Subcategories

This category has only the following subcategory.

B

B10D Settings & Configuration

Pages in category 'ZyXEL VMG1312 B10D'

The following 9 pages are in this category, out of 9 total.

B

D

ZyXEL and mixed NAT non-NAT LAN Subnets

Q

S

VMG1312-B10A: Static Routes

V

VMG1312 Vs VMG3925

Z

Media in category 'ZyXEL VMG1312 B10D'

The following 3 files are in this category, out of 3 total.

B10D-LEDs.png 1,200 × 740; 174 KB
VMG1312 B10D 2017 Quick Start - plugging in.png 1,200 × 549; 141 KB
Vmg1312-b10d.png 505 × 542; 171 KB

@@ Line 1: / Line 1: @@
-__NOTOC__<indicator name="Front">[[File:Menu-B10D.svg|link=:Category:AA_Routers|30px|Back up to the A&A Routers Page]]</indicator>
+__NOTOC__<indicator name="Front">[[File:Menu-B10D.svg|link=:Category:AA Routers|30px|Back up to the A&A Routers Page]]</indicator>
-The ZyXEL VMG1312-B10D is the successor to the VMG1312-B10A. It is the default router supplied by AAISP from the summer of 2017.
+The ZyXEL VMG1312-B10D is the successor to the VMG1312-B10A. It is the default router supplied by AAISP from the summer of 2017. It is the younger sibling of the VMG3925, you can see more differences on the [[VMG1312 Vs VMG3925]] page.
 [[File:Vmg1312-b10d.png|thumb]]
@@ Line 14: / Line 14: @@
 =Summary=
-The ZyXEL B10D (VMG1312-B10D) is an all-in-one ADSL/VDSL router with WiFi and 4 network ports. AAISP started supplying these in July 2017, these are now the default router.
+The ZyXEL VMG1312 (VMG1312-B10D) is an all-in-one ADSL/VDSL router with WiFi and 4 network ports. AAISP started supplying these in July 2017, these are now the default router.
 '''Basic Specs:'''
 *4x 10/100M ports.
 *Modem supports VDSL (FTTC) and ADSL/ADSL2.
-*WiFi is 2.4GHz, 802.11 b/g/n
+*WiFi is 2.4&nbsp;GHz, 802.11 b/g/n
-*Broadcom chipset
+*Broadcom 63381 chipset
+*MTU 1500 when in bridge mode not possible yet, but we are working with ZyXEL on this. (2017-11)
-*Baby jumbo frame support, therefore supporting 1500 byte MTU
-==Suitable for:==
+==Suitable for==
 *ADSL1
 *ADSL2
 *VDSL (FTTC) as an ethernet router plugged in to a VDSL modem (no longer a common setup, as Openreach no longer provide VDSL modems)
-*VDSL (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick). (with baby jumbo frame support, therefore supporting 1500 byte MTU)
+*VDSL (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick). <del>(with baby jumbo frame support, therefore supporting 1500 byte MTU)</del>
 *FTTP using an ethernet WAN port doing PPPoE.
+== Security Advisories ==
+ZyXEL have a page with their Security Advisories: https://www.zyxel.com/support/security_advisories.shtml
 ==Factory Default Admin Username/Password==
@@ Line 44: / Line 46: @@
 !Password:
 |1234
+(Some routers will be issued with the password 'aaisp1234')
 |}
+Supervisor password:
-==1500 MTU==
-Units configured before 2017-09-22 will have been served a configuration limiting the maximum MTU in bridge mode at 1492 in error.
+The VMG1312 has an autogenerated supervisor password (hashed from the serial number) - however you can read /etc/passwd from the device as the admin user via SSH - you'll need to crack the hash (e.g. with hashcat), the password will be 8 characters long using characters 0-9,a-f (lower case)
-For units configured in bridge mode before this date, a full reset of the ZyXEL is required in order to attain 1500 byte MTU on the bridged interface.
-This can be accomplished by holding the reset button down with a paperclip or other pointy object for approximately 10 seconds, until the LED goes red.
-This will cause the router to reprovision, and download the correct configurations from our TR-069 server.
 [[Category:AA Routers]]