Stopping Open DNS - ZyXEL P660R-D1: Difference between revisions

Revision as of 08:59, 27 Haziran 2013

The factory setting for this router is for DNS to be open on the WAN. This will be changed when configured by AAISP, but if it is configured from new, or reset, then WAN side DNS will need to be disabled. This can be done from the web interface and setting DNS Access Status to LAN. Go to:

Advanced - Remote MGMT - DNS - LAN Only

Unable to get to the web interface?

If you are unable to get to the web interface, then try turning the router off and on again.

What is the admin username and password

Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the password. On the ZyXEL the username is admin.

Changing this via Telnet

If you still can't access the router web pages, then you can do this via telnet by running the following commands:

sys server load 
sys server access dns 2 
sys save

This also applies to the P-660HW-T1 v2 Router

Also see:

Router_-_ZyXEL_P660R-D1

@@ Line 6: / Line 6: @@
 [[File:Zyxeld1-opendns-3.png]]
+==Unable to get to the web interface?==
-Or from the CLI (telnet):
+If you are unable to get to the web interface, then try turning the router off and on again.
+==What is the admin username and password==
+Most routers supplied by AAISP will have a sticker or card on the base of the router which will have the password. On the ZyXEL the username is admin.
+==Changing this via Telnet==
+If you still can't access the router web pages, then you can do this via telnet by running the following commands:
  sys server load
  sys server access dns 2