Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

B10D Factory Reset: Difference between revisions

← Older edit
Content deleted Content added
AA-Andrew (talk | contribs)
autoreview, Bureaucrats, editor, Interface administrators, reviewer, Administrators
12,616 edits
 
(One intermediate revision by one other user not shown)
Line 25: Line 25:
To reset the router to the AAISP base settings, follow these steps:
To reset the router to the AAISP base settings, follow these steps:


#Unplug everything from the router except the power and phone line
#Switch router on, wait for it to boot up
#Switch router on, wait for it to boot up
#With a paperclip, pen, etc., hold in the reset button
#With a paperclip, pen, etc., hold in the reset button
Line 57: Line 58:
ROM-D cleaned.
ROM-D cleaned.
</syntaxhighlight>
</syntaxhighlight>

You may need to obtain the supervisor password, which is specific for each device and not known by AAISP.


At this point you can reset the router for this to be applied. The router will then boot up in its original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.
At this point you can reset the router for this to be applied. The router will then boot up in its original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.
Retrieved from "http://support.aa.net.uk/B10D_Factory_Reset"