Category:Incoming L2TP: Difference between revisions

(11 intermediate revisions by 3 users not shown)

Line 1:

__NOTOC__<indicator name="L2TP">[[File:Menu-L2TP.svg|link=:Category:L2TP|30px|Back up to the L2TP Category]]</indicator>

= ~~L2TP~~ ~~from~~ ~~Customers~~ to ~~AAISP~~ =

= Why use out L2TP service? =

There are two reasons to use L2TP to connect in to AAISP:

Line 10:

# Connect in to AAISP over a third-party internet connection.

#* This gives you your an AAISP IPv4 address and an IPv6 block. This will then give you unfiltered internet access with public IP addresses etc.

#* Speed is capped at 200Mb/s (3Mb/s for the low-cost Light service).

#* There are more reasons for doing this and further information and ordering on [https://www.aa.net.uk/broadband/l2tp-service/ A&A L2TP service].

Line 29:

Line 28:

=== MTU ===

* see: [[L2TP MTU]]

You may have to set a lower MTU to accommodate the host ISP, possibly as low as 1462 (or lower for some ISPs and still lower for mobile networks). In theory fragments will work to allow 1500 MTU on our service, but fragments are inefficient, and if everyone sends fragmented packets that could degrade the service.

=== Port forwarding on some 'Mobile Broadband' routers ===

Line 35:

Line 34:

= Notes on setting up L2TP IN to AAISP: =

{{AAMenu|img=menu-packet.svg|title=MTU|link=L2TP_MTU|text=Learn about MTU and L2TP}}

{{AAMenu|img=Menu-FireBrick.svg|link=L2TP_Client:_FireBrick|title=L2TP from FireBrick|text=Creating a L2TP connection from a FireBrick to AAISP}}

{{AAMenu|img=Menu-Apple.svg|link=L2TP_Client:_OSX|title=L2TP from OSX|text=Creating a L2TP connection from Apple OSX to AAISP}}

Line 42:

{{AAMenu|img=Menu-Linux.svg|link=L2TP_Client:_Linux|title=L2TP from Linux|text=Creating a L2TP connection from Linux/Ubuntu/Network Manager to AAISP using xl2tpd}}

{{AAMenu|img=Menu-Linux.svg|link=Router:Linux_-_Debian_-_With_L2TP_Fallback|title=L2TP Failover with Debian|text=Creating a L2TP fallback for AAISP using xl2tpd}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_OpenBSD|title=L2TP from OpenBSD|text=Creating a L2TP connection from OpenBSD to AAISP using xl2tpd}}

{{AAMenu|img=Menu-Routerboard.svg|link=L2TP_Client:_Routerboard|title=L2TP from Routerboard|text=Creating a L2TP connection from Routerboard to AAISP}}

{{AAMenu|img=Menu-OpenWRT.svg|link=L2TP_Client:_OpenWRT|title=L2TP from OpenWRT|text=Creating a L2TP connection from OpenWRT to AAISP}}

Line 47:

Line 48:

{{AAMenu|img=Menu-voip.svg|link=L2TP_Client:_SNOM|title=L2TP from a SNOM VoIP Phone|text=Creating a L2TP connection from a SNOM phone to AAISP}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_Mobile_Broadband_Routers|title=L2TP from 4G/5G Huawei/Gigacube|text=Creating a L2TP connection 4G/5G Huawei/Gigacube type mobile broadband routers to AAISP}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_Other_Routers|title=L2TP from Other Routers|text=Generic information for creating a L2TP connection from other routers to AAISP (eg Netgear, TP-Link etc that are not listed here.}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_Other_Routers|title=L2TP from Other Routers|text=Generic information for creating a L2TP connection from other routers to AAISP (eg Netgear, TP-Link etc that are not listed here}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_Ubiquiti_Edgerouter|title=Ubiquiti|text=Problems with Ubiquiti Edgerouter.}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_Ubiquiti_Edgerouter|title=Ubiquiti|text=Problems with Ubiquiti Edgerouter}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:~~_MikroTik_RouterBOARD_hEX~~|title=MikroTik|text=Create an L2TP connection from a MikroTik Routerboard.}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_Routerboard|title=MikroTik|text=Create an L2TP connection from a MikroTik Routerboard}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_OpenWRT_with_Policy_Based_Routing|title=OpenWRT|text=Create an L2TP connection from a OpenWRT with Policy Based Routing.}}

{{AAMenu|img=Menu-router.svg|link=L2TP_Client:_OpenWRT_with_Policy_Based_Routing|title=OpenWRT-Policy Based Routing|text=Create an L2TP connection from a OpenWRT with Policy Based Routing}}

[[Category:L2TP]]