VoIP Phones - Grandstream HT8xx: Difference between revisions

(2 intermediate revisions by 2 users not shown)

Line 15:

* [https://documentation.grandstream.com/knowledge-base/firmware-upgrade-guide/ Grandstream's upgrade guide]

* [https://www.grandstream.com/support/firmware Grandstream's firmware download page]

* [https://www.grandstream.com/hubfs/Product_Documentation/HT8xx_Security_Manual.pdf Grandstream's security guide]

=Obtaining an IP address via handset=

Line 56:

Line 57:

* Unregister on Reboot = Yes

=== no ring, but actually working? ===

If you have an older phone plugged in to the Grandstream, and if calls work, but the phone doesn't actually ring, then you may be needing a RG11 to BT adapter that includes a ring capacitor, such as https://www.broadbandbuyer.com/products/2370-esscable-rjp-bts/

== NAT notes ==

Line 67:

Line 69:

==IPv6 Only==

I finally bit the bullet and configured the unit for IPv6 only. It needs to know about IPv6 DNS and NTP servers, and would need to use an IPv6 syslog server if that service is required, but it just works. Note that the options for getting its IPv6 address are DHCPv6 or static config - it doesn't seem able to use SLAAC.

I finally bit the bullet and configured the unit for IPv6 only. It needs to know about IPv6 DNS and NTP servers, and would need to use an IPv6 syslog server if that service is required, but it just works. Note that the options for getting its IPv6 address are DHCPv6 or static config - it doesn't seem able to use SLAAC. Update (2025): on more recent firmwares selecting 'dynamically assigned via DHCP' will use SLAAC if there's no DHCPv6 server).

==Firewall & Security==