Router - TG582N - WiFi: Difference between revisions
(Created page with "= Disable Wifi (Wireless) = Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply You can also press the wifi button on the router to enable/...") |
(clean up) |
||
| (17 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
[[Image:T582-small.png|link=:Category:Router TG582N|Got to Main TG582N Page]] |
|||
| ⚫ | |||
The TG582n supports 802.11b, g, and n with a single radio instance on 2.4 GHz. However its maximum speed on 802.11n appears to be 65Mbit/s, which |
|||
isn't much of an improvement over 802.11g. |
|||
| ⚫ | |||
Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply |
Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply |
||
You can also press the |
You can also press the WiFi button on the router to enable/disable the WiFi in the same way. Note that if you have configured multiple SSIDs (as per the next section) then the WiFi button on the router only enables/disables the first of the SSIDs (i.e. ssid_id = 0). |
||
= Adding extra SSIDs = |
|||
The router only has one WiFi radio instance, but it is possible to configure up to 4 |
|||
SSIDs on that radio instance. This can be useful in a number of scenarios: |
|||
* One has a single device which can only do WEP authentication, and one doesn't want to allow WEP for all devices |
|||
* One wishes to provide guest access, but the guests shouldn't have access to one's LAN |
|||
* One wishes to easily switch a WiFi client between two (or more) configurations |
|||
See http://web.archive.org/web/20160723055447/http://npr.me.uk/advdmz.html for instructions. Note that the ''any'' option controls broadcasting of the SSID. |
|||
==Other pages regarding this router== |
|||
<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl> |
|||
[[Category:Router TG582N|WiFi]] |
|||
Latest revision as of 00:19, 18 August 2018
The TG582n supports 802.11b, g, and n with a single radio instance on 2.4 GHz. However its maximum speed on 802.11n appears to be 65Mbit/s, which isn't much of an improvement over 802.11g.
Disable WiFi (Wireless)
Via HTTP interface - Home Network - WLAN - Configure - untick WLAN Enable, click Apply
You can also press the WiFi button on the router to enable/disable the WiFi in the same way. Note that if you have configured multiple SSIDs (as per the next section) then the WiFi button on the router only enables/disables the first of the SSIDs (i.e. ssid_id = 0).
Adding extra SSIDs
The router only has one WiFi radio instance, but it is possible to configure up to 4 SSIDs on that radio instance. This can be useful in a number of scenarios:
- One has a single device which can only do WEP authentication, and one doesn't want to allow WEP for all devices
- One wishes to provide guest access, but the guests shouldn't have access to one's LAN
- One wishes to easily switch a WiFi client between two (or more) configurations
See http://web.archive.org/web/20160723055447/http://npr.me.uk/advdmz.html for instructions. Note that the any option controls broadcasting of the SSID.
Other pages regarding this router
<ncl style=bullet maxdepth=5 headings=bullet headstart=2 showcats=1 showarts=1 showfirst=1>Category:Router TG582N</ncl>