VMG1312-B10A: Firewall: Difference between revisions
m (Mention that 'iptables' is available from the CLI) |
m (→top: clean up, typos fixed: etc → etc.) |
||
| Line 4: | Line 4: | ||
Security -> Firewall -> Access Control |
Security -> Firewall -> Access Control |
||
You don't need to create any special 'protocol' lists, you can simply enter in the Target IP/Port etc in to the rule. |
You don't need to create any special 'protocol' lists, you can simply enter in the Target IP/Port etc. in to the rule. |
||
From the CLI the 'iptables' command is available, which is familiar to Linux users. |
From the CLI the 'iptables' command is available, which is familiar to Linux users. |
||
[[Category: |
[[Category:ZyXEL VMG1312|Firewall]] |
||
Revision as of 00:07, 15 March 2017
The default firewall state for IPv4 and IPv6 would be enabled. This can be disabled via the AAISP control pages. Rules can be added as required.
The firewall is configured via the router's Web interface:
Security -> Firewall -> Access Control
You don't need to create any special 'protocol' lists, you can simply enter in the Target IP/Port etc. in to the rule.
From the CLI the 'iptables' command is available, which is familiar to Linux users.