ASUS RT-AC68U Intial Setup

ASUS-RT-AC68U Initial Setup

Initial setup is completely painless: after connecting the Openreach VDSL modem to the WAN port, the quick setup utility works out of the box, detects PPPoE automatically and requests the user/password setting. This is followed by WLAN parameters and a suggested firmware upgrade, then everything is set.

By default IPv6 support is switched off, but it can be easily enabled in the web interface.

In firmware version 3.0.0.4.380_3831 the "native" IPv6 setting (using the PPP option) didn't quite work out. It automatically obtained my allocated /64 prefix alright and distributed it to my LAN, but had no default IPv6 gateway set. You can verify this in "System Log/IPv6".

Setting the IPv6 connection type to Static IPv6 solves the problem. The individual settings on the IPv6 page that worked are:

• Connection type: Static IPv6
• Interface: PPP
• WAN IPv6 Address: 2001:8b0:1111:1111:0:ffff:nnnn:nnnn (nnnn:nnnn is your static IPv4 address in hex)
• WAN prefix length: 128
• WAN IPv6 Gateway: fe80::xxxx:xxxx:xxxx:xxxx
• (The gateway address can be found in the main system log: look for
• "remote LL address" in one of the pppd log entries.)
• LAN IPv6 address: [your /64 prefix followed by ::1]
• LAN prefix length: 64
• Auto Configuration Setting: Stateless
• DNS servers: 2001:8b0::2020 / 2001:8b0::2021
• Enable Router Advertisement: Enable