ZyXEL Port Forwarding: Difference between revisions

Content deleted Content added

Inline

@@ Line 3: / Line 3: @@
 portmap (port map) or port forwarding on a VMG1312
-=== This has been tested to work with firmware ver. V1.00(AAJZ.5)C0). ===
+== This has been tested to work with firmware ver. V1.00(AAJZ.5)C0). ==
 # Log in to router
@@ Line 13: / Line 13: @@
 [[File:3.png]]
-# Go to Network Setting > NAT. Set a name. WAN interface dropdown should be set based on the type of service i.e: AAISP-ADSL for ADSL or AAISP-VDSL for VDSL. WAN IP should be the WAN IP (of course), server address will be the address you'd like to forward to (same as destination IP in the previous menu). Trigger start port, end port, translation start port, and translation end port need to be set to the port you're looking to forward. Protocol should be set as required.
+# Go to Network Setting > NAT. Set a name. WAN interface dropdown should be set based on the type of service i.e.: AAISP-ADSL for ADSL or AAISP-VDSL for VDSL. WAN IP should be the WAN IP (of course), server address will be the address you'd like to forward to (same as destination IP in the previous menu). Trigger start port, end port, translation start port, and translation end port need to be set to the port you're looking to forward. Protocol should be set as required.
 [[File:4.png]]