Revision as of 16:59, 7 November 2017

The ZyXEL VMG1312-B10D is the successor to the VMG1312-B10A. It is the default router supplied by AAISP from the summer of 2017.

Quick Start

Guide with how to plug in and what the LEDs mean

Further Documents

Manuals and other documentation for the router

Settings & Configuration

Information about how A&A configure the router and what settings are available to customers

Software

Software information and downloads

Summary

The ZyXEL B10D (VMG1312-B10D) is an all-in-one ADSL/VDSL router with WiFi and 4 network ports. AAISP started supplying these in July 2017, these are now the default router.

Basic Specs:

4x 10/100M ports.
Modem supports VDSL (FTTC) and ADSL/ADSL2.
WiFi is 2.4GHz, 802.11 b/g/n
Broadcom chipset
Baby jumbo frame support, therefore supporting 1500 byte MTU

Suitable for:

ADSL1
ADSL2
VDSL (FTTC) as an ethernet router plugged in to a VDSL modem (no longer a common setup, as Openreach no longer provide VDSL modems)
VDSL (FTTC) or ADSL as a bridging modem to a third-party PPPoE router (e.g. FireBrick). (with baby jumbo frame support, therefore supporting 1500 byte MTU)
FTTP using an ethernet WAN port doing PPPoE.

Factory Default Admin Username/Password

Note: An AAISP configured router will have a different username and password.

Default/Factory Password
IP:	192.168.1.1
Username:	admin
Password:	1234

Subcategories

This category has only the following subcategory.

B

B10D Settings & Configuration

Pages in category 'ZyXEL VMG1312 B10D'

The following 9 pages are in this category, out of 9 total.

B

D

ZyXEL and mixed NAT non-NAT LAN Subnets

Q

S

VMG1312-B10A: Static Routes

V

VMG1312 Vs VMG3925

Z

Media in category 'ZyXEL VMG1312 B10D'

The following 3 files are in this category, out of 3 total.

B10D-LEDs.png 1,200 × 740; 174 KB
VMG1312 B10D 2017 Quick Start - plugging in.png 1,200 × 549; 141 KB
Vmg1312-b10d.png 505 × 542; 171 KB

@@ Line 45: / Line 45: @@
 |1234
 |}
-==1500 MTU==
-Units configured before 2017-09-22 will have been served a configuration limiting the maximum MTU in bridge mode at 1492 in error.
-For units configured in bridge mode before this date, a full reset of the ZyXEL is required in order to attain 1500 byte MTU on the bridged interface.
-This can be accomplished by holding the reset button down with a paperclip or other pointy object for approximately 10 seconds, until the LED goes red.
-This will cause the router to reprovision, and download the correct configurations from our TR-069 server.
 [[Category:AA Routers]]