Router - DLINK 320B: Difference between revisions
Content deleted Content added
→Initial setup using the web admin interface: strengthened wording; removed cop-out Tags: Mobile edit Mobile web edit |
→Resetting to factory settings: added code markup Tags: Mobile edit Mobile web edit |
||
| Line 58: | Line 58: | ||
To reset the modem to factory settings, locate the reset button hole on the rear panel of the unit. With the modem powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the modem will go through its reboot process. |
To reset the modem to factory settings, locate the reset button hole on the rear panel of the unit. With the modem powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the modem will go through its reboot process. |
||
Wait about 30 seconds to access the modem. The default IPv4 address for the modem’s http admin user interface on the LAN is 192.168.1.1/24. Your own IPv4 address will need to be in the same subnet and different from that of the modem, ie set to something in the range 192.168.1.2 - .254. You can then log in to the web admin interface using a web browser at <code><nowiki>http://192.168.1.1</nowiki></code>, username=admin, password=admin. |
Wait about 30 seconds to access the modem. The default IPv4 address for the modem’s http admin user interface on the LAN is 192.168.1.1/24. Your own IPv4 address will need to be in the same subnet and different from that of the modem, ie set to something in the range <code>192.168.1.2</code> - <code>.254</code>. You can then log in to the web admin interface using a web browser at <code><nowiki>http://192.168.1.1</nowiki></code>, username=admin, password=admin. |
||
== Images == |
== Images == |
||