Router - ZyXEL P660R-D1: Difference between revisions
| Line 58: | Line 58: | ||
==Bridge config== |
==Bridge config== |
||
To configure the ZyxEL as a bridge, the settings to use are: |
|||
For a BT Line ( which will do PPPoA or PPPoE ): |
|||
Name: AAISP (But can be anything) |
Name: AAISP (But can be anything) |
||
Mode: Bridge |
Mode: Bridge |
||
Encapsulation: RFC 1483 |
Encapsulation: RFC 1483 |
||
Multiplexing: LLC (VC may work on 20cn, but stick with LLC) |
Multiplexing: LLC (VC may work on 20cn, but stick with LLC) |
||
VPI: 0 |
VPI: 0 |
||
VCI: 38 |
VCI: 38 |
||
ADSL modulation type: Multimode |
ADSL modulation type: Multimode |
||
==Netbios Filter== |
==Netbios Filter== |
||
Revision as of 09:49, 20 Haziran 2013
| LED Status | ||||
|---|---|---|---|---|
| Steady | Flashing | Blink | Off | |
| Power | Power on | Power off | ||
| Ethernet | ||||
| DSL | In Sync | Attempting sync | Traffic | No Sync |
| Internet | PPP down | PPP online | ||
Default Admin Username/Password
| Default/Factory Password | |
|---|---|
| Username: | admin |
| Password: | 1234 |
| AAISP configured Password | |
| Printed on card with router | |
Basic Configuration for PPPoA
Bridge config
To configure the ZyxEL as a bridge, the settings to use are:
Name: AAISP (But can be anything) Mode: Bridge Encapsulation: RFC 1483 Multiplexing: LLC (VC may work on 20cn, but stick with LLC) VPI: 0 VCI: 38 ADSL modulation type: Multimode