Bonding with Cisco IOS: Difference between revisions

← Older edit Newer edit →

Content deleted Content added

Inline

@@ Line 118: / Line 118: @@
 boot-start-marker
 boot-end-marker
-!
 !
 no logging buffered
@@ Line 127: / Line 126: @@
 dot11 syslog
 ip source-route
-!
 !
 ip cef
@@ Line 138: / Line 136: @@
 ip dhcp excluded-address <excludeyourroutingaddresses>
 !
+# DHCP for our internal network
 ip dhcp pool HOME
  network 192.168.1.0 255.255.255.0
@@ Line 145: / Line 144: @@
  lease 7
 !
+# DHCP for our external network
 ip dhcp pool AAISP
- network <yournetworkbase> 255.255.255.248
+ network <yourexternalnetworkbase> 255.255.255.248
  domain-name home-external
  dns-server 217.169.20.20
@@ Line 167: / Line 167: @@
 bridge irb
 !
-# This is our roting interface in the global domain, we NAT here
+# This is our routing interface in the global domain, we NAT here
 interface GigabitEthernet0/0
  description HOME-AAISP
@@ Line 176: / Line 176: @@
  speed auto
 !
+# This is our routing interface in the AAISP domain, you need a patch between GigabitEthernet0/0 and GigabitEthernet0/1
 interface GigabitEthernet0/1
  description AAISP-HOME
@@ Line 214: / Line 215: @@
  !
 !
+# spanning-tree portfast gets rid of the annoying forwarding delay on PHY up
 interface FastEthernet1/0
  no ip address
@@ Line 382: / Line 384: @@
 ntp server 37.122.210.134 source GigabitEthernet0/0
 end</nowiki>
+== Changing target DSL noise margin within IOS
+A little known trick, which I am sure will upset support!
+ <nowiki>service internal
+!
+int atm0/0/0
+# Replace <num> with the desired offset in db
+ dsl-noisemargin -<num>
+!