Revision as of 17:19, 6 Ocak 2015

Related Pages on the A&A Website:

Knowledge Base - Router Setup

These are the basic settings for configuring ADSL modems/routers for a connection to AAISP using a BT or a TT line. (more info in your Information Pack (available from sales or via clueless if required).

Basic BT and TT PPPoA Settings

(Installed after Dec 2010)

BT-Zyxel.png

Username (as given, e.g. xx@a.1)
Password (as given, can be changed on the Control Pages)
VPI = 0
VCI = 38
MTU = 1500
PPPoA
Mux = VC Mux
Line Type = Auto
WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)

More Details on Router setup knowledgebase

Basic BE PPPoE Settings (Legacy/Old Connections)

This is for Be lines installed before December 2010, as lines after this will be PPPoA, and will have the same settings as a BT line, as above.

BE-Zyxel.png

Username (as given, e.g. yy@a.1)
Password (as given, can be changed on the Control Pages)
VPI = 0
VCI = 101
MTU = 1492
PPPoE
Mux = LLC
Line Type = Auto
WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)

@@ Line 7: / Line 7: @@
 (Installed after Dec 2010)
 [[Image:BT-Zyxel.png|thumb|150px|BT-Zyxel.png]]
-*Username (as given, eg xx@a.1)
+*Username (as given, e.g. xx@a.1)
 *Password (as given, can be changed on the Control Pages)
 *VPI = 0
@@ Line 24: / Line 24: @@
 [[Image:BE-Zyxel.png|thumb|150px|BE-Zyxel.png]]
-*Username (as given, eg yy@a.1)
+*Username (as given, e.g. yy@a.1)
 *Password (as given, can be changed on the Control Pages)
 *VPI = 0