VMG1312-B10A: AAISP Configuration

AAISP configure routers via TR-069 protocol. We generate a config file and this is sent to the router. Firmware updates are also able to be sent to the router.

Customers are free to alter the configuration as supplied, sending a configuration from the Control Pages will overwrite any settings changed though.

Here is an overview of the settings that are modified from the default:

• Configure WAN interface (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP))
• Configure PPP settings as per the service
• Configure DHCP (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers)
• Configure LAN subnet if line has a block of public IPs. (else default is 192.168.1.1)
• Configure WiFi (Further Settings on Control Pages: SSID, Password or disable WiFi)
• Configure Firewall on/off (Settings on Control Pages, Default=Enabled)
• Configure TR-069
• Disable NAT, if customer has a public IP block
• Disable SNMP
• Disable 3G backup
• Change NTP servers to be time.aa.net.uk and 0.uk.pool.ntp.org
• Change 'supervisor' password (Setting on Control Pages)
• Change 'admin' password (Setting on Control Pages)
• Change Remote Management Options (Further Settings on Control Pages)
• Change QoS to give upstream priority based on 'Packet Length'
• Change 'Deny Ping Response' to Disable, to allow the router to reply to ping.
• Disable the default QoS Classes
• Remove the default read-only zyuser user

This list may not be exhaustive, and may change over time.

Notes

DOS protection is left enabled - this may give some unexpected results, eg the router will only reply to 20 pings before it stops replying.

DOS protection settings as described in the user manual