B10D Factory Reset: Difference between revisions

Line 8:

! State !! Info !! How to apply

|-

| ZyXEL Factory Settings || The actual state of the router before AAISP apply their 'base' setting || 'save_default clean' command via CLI. More info below

! ZyXEL Factory Settings || The actual state of the router before AAISP apply their 'base' setting || 'save_default clean' command via CLI. More info below

|-

| AAISP Base Settings || As supplied by AAISP before the config for your line is applied, the settings allow the router to get online and obtain the specific configuration for your line || Upload AAISP's rom-d file. Not usually required as it is usually already loaded by AAISP, More info below.

! AAISP Base Settings || As supplied by AAISP before the config for your line is applied, the settings allow the router to get online and obtain the specific configuration for your line || Upload AAISP's rom-d file. Not usually required as it is usually already loaded by AAISP, More info below.

|-

| Configured by AAISP || The settings for your specific line, along with settings as per the Control Pages || Usually when first plugged in on a customer line. Or, Via the Control Pages, or by holding in reset for 5 sec. More info below

! Configured by AAISP || The settings for your specific line, along with settings as per the Control Pages || Usually when first plugged in on a customer line. Or, Via the Control Pages, or by holding in reset for 5 sec. More info below

|-

| Customer Edited || If customer makes further changes to their config after AAISP has sent the settings || Restore from a backup you made previously

! Customer Edited || If customer makes further changes to their config after AAISP has sent the settings || Restore from a backup you made previously

|}