VoIP Phones - Grandstream HT8xx: Difference between revisions
Content deleted Content added
Show steps for whitelist and blacklist |
Mention the internal IVR server which enables you to find the IP address, and document a couple of config options which can reduce surprises. |
||
| Line 19: | Line 19: | ||
Similar units are the HT802 (which has 2 FXS ports), and the HT81x series (which adds a NAT router, and is available with different |
Similar units are the HT802 (which has 2 FXS ports), and the HT81x series (which adds a NAT router, and is available with different |
||
numbers of FXS ports). |
numbers of FXS ports). |
||
If supplied without a Quick Start Guide, connect to a router which acts as a DHCP server and connect a telephone to the unit. Then dial '***' to access the internal Interactive Voice Response (IVR) system. '02' will read out the unit's IP address(es). Point a web browser at one of those addresses, and login as 'admin','admin'. |
|||
*''Basic Settings'', ''Internet Protocol'', select ''Both, prefer IPv6'' (or, if you're brave, select ''IPv6 Only'') |
*''Basic Settings'', ''Internet Protocol'', select ''Both, prefer IPv6'' (or, if you're brave, select ''IPv6 Only'') |
||
*See https://www.ukvoipforums.com/viewtopic.php?t=1061 for UK settings (although you might want to set the ''NTP Server'' to ''time.aa.net.uk'' as that has IPv6 addresses) |
*See https://www.ukvoipforums.com/viewtopic.php?t=1061 for UK settings (although you might want to set the ''NTP Server'' to ''time.aa.net.uk'' as that has IPv6 addresses) |
||
*Can support pulse dialling handsets - ''FXS Port'', ''Enable Pulse Dialing'', select ''Yes'' |
*Can support pulse dialling handsets - ''FXS Port'', ''Enable Pulse Dialing'', select ''Yes''. As a bonus, this allows a pulse dialling handset to interact with IVR systems - at least until the system asks you to press '*' or '#'. |
||
*Can send BT CLID to handsets, see UK settings link above |
*Can send BT CLID to handsets, see UK settings link above |
||
A couple of personal favourite config options: |
|||
* There's a confusingly explained option under ''FXS Port'' labelled ''Use # as Dial Key'', explained as ''if set to Yes, "#" will function as the "(Re-)Dial" key''. If set to ''No'' the # key works as a normal key, if set to ''Yes'' it acts as a special key variously named ''Send'' or ''Dial'' which can be used as ''Redial last number called'' - but that'll be the last number dialled by the unit, not the last number dialled by the phone concerned. I set it to ''No'' to avoid surprises. |
|||
* Also under ''FXS Port'' are some options regarding Hook Flash. This corresponds to what the UK calls ''Timed Break Recall''. I set the option ''Enable Hook Flash'' to ''No'' - otherwise you can think you've hung up on a call by tapping the hook switch but you haven't (and your phones ring to remind you - so you pick the handset up and find the other party is confused too). |
|||
==Firewall & Security== |
==Firewall & Security== |
||
Revision as of 12:19, 8 November 2018
| Feature Notes | |
|---|---|
| Supports 302 Redirect | ? |
| Tested on FireBrick SIP Server | No |
| IPv6 Support | Yes |
This is based on the author's experience of the HT801 (bought new in Sep 2018), which is a small unit which provides 1 FXS port and no FXO ports. It does IPv6. Similar units are the HT802 (which has 2 FXS ports), and the HT81x series (which adds a NAT router, and is available with different numbers of FXS ports).
If supplied without a Quick Start Guide, connect to a router which acts as a DHCP server and connect a telephone to the unit. Then dial '***' to access the internal Interactive Voice Response (IVR) system. '02' will read out the unit's IP address(es). Point a web browser at one of those addresses, and login as 'admin','admin'.
- Basic Settings, Internet Protocol, select Both, prefer IPv6 (or, if you're brave, select IPv6 Only)
- See https://www.ukvoipforums.com/viewtopic.php?t=1061 for UK settings (although you might want to set the NTP Server to time.aa.net.uk as that has IPv6 addresses)
- Can support pulse dialling handsets - FXS Port, Enable Pulse Dialing, select Yes. As a bonus, this allows a pulse dialling handset to interact with IVR systems - at least until the system asks you to press '*' or '#'.
- Can send BT CLID to handsets, see UK settings link above
A couple of personal favourite config options:
- There's a confusingly explained option under FXS Port labelled Use # as Dial Key, explained as if set to Yes, "#" will function as the "(Re-)Dial" key. If set to No the # key works as a normal key, if set to Yes it acts as a special key variously named Send or Dial which can be used as Redial last number called - but that'll be the last number dialled by the unit, not the last number dialled by the phone concerned. I set it to No to avoid surprises.
- Also under FXS Port are some options regarding Hook Flash. This corresponds to what the UK calls Timed Break Recall. I set the option Enable Hook Flash to No - otherwise you can think you've hung up on a call by tapping the hook switch but you haven't (and your phones ring to remind you - so you pick the handset up and find the other party is confused too).
Firewall & Security
- You will also want to set up firewall rules, as per the VoIP Firewall page.
- Also see the VoIP Security page for information about securing your VoIP service.
- You can have an IP address whitelist and blacklist for web, telnet, and ssh access to the ATA. Unfortunately it only accepts IPv4 address ranges. Basic Settings, Web/SSH Access, White List for WAN Side, similar for blacklist.