FireBrick 3G Dongle: Difference between revisions
Content deleted Content added
CrazyTeeka (talk | contribs) m Tidy Up |
CrazyTeeka (talk | contribs) |
||
| Line 43: | Line 43: | ||
If using AAISP, then the options for IPv6 routing on the [[:Category:Control Pages|Control Pages]] allow an IPv6 block to be routed to a tunnel endpoint if the main routing (ie ADSL/FTTC) goes down. This means IPv6 can be routed to the 3G dongle if the main broadband(s) go down. The MTU will be limited though. |
If using AAISP, then the options for IPv6 routing on the [[:Category:Control Pages|Control Pages]] allow an IPv6 block to be routed to a tunnel endpoint if the main routing (ie ADSL/FTTC) goes down. This means IPv6 can be routed to the 3G dongle if the main broadband(s) go down. The MTU will be limited though. |
||
Here we have an example config, with default logging. Please make changes to suit your FireBrick setup |
Here we have an example config, with default logging. Please make changes to suit your FireBrick setup. |
||
If your MTU is 1500 use this: |
|||
<syntaxhighlight> |
<syntaxhighlight> |
||
| Line 61: | Line 64: | ||
</syntaxhighlight> |
</syntaxhighlight> |
||
If your MTU is 1492 use this instead: |
|||
<syntaxhighlight> |
|||
<interface name="LAN" port="LAN" ra-client="false"> |
|||
<subnet ip="2001:8b0::1/64" ra="true" ra-other="dhcpv6" ra-mtu="1472" ra-dns="2001:8b0::2020 2001:8b0::2021"/> |
|||
</interface> |
|||
<interface name="WAN" port="WAN" ra-client="false"/> |
|||
<ppp name="AAISP" port="WAN" username="me@a.1" password="secret" lcp-rate="1" lcp-timeout="5" graph="AAISP" log="default"/> |
|||
<usb> |
|||
<dongle name="AAISP-BACKUP" apn="m2m.aql.net" username="me@a.3" password="secret" nat="false" graph="AAISP-BACKUP" log="default"/> |
|||
</usb> |
|||
<route ip="::/0" gateway="81.187.81.6" comment="IPv6 default route using IPv4 tunnel"/> |
|||
</syntaxhighlight> |
|||
=3G profiles - turning the dongle off outside of office hours= |
=3G profiles - turning the dongle off outside of office hours= |
||