General Router Settings

Related Pages on the A&A Website:

• Knowledge Base - Router Setup

---

These are the basic settings for configuring ADSL modems/routers for a connection to AAISP using a BT or a TT line. (more info in your Information Pack (available from sales or via clueless if required).

Basic BT and TT PPPoA Settings

(Installed after Dec 2010)

BT-Zyxel.png

• Username (as given, e.g. xx@a.1)
• Password (as given, can be changed on the Control Pages)
• VPI = 0
• VCI = 38
• MTU = 1500
• PPPoA
• Mux = VC Mux
• Line Type = Auto
• WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
• DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)

More Details on Router setup knowledgebase

Basic BE PPPoE Settings (Legacy/Old Connections)

This is for Be lines installed before December 2010, as lines after this will be PPPoA, and will have the same settings as a BT line, as above.

BE-Zyxel.png

• Username (as given, e.g. yy@a.1)
• Password (as given, can be changed on the Control Pages)
• VPI = 0
• VCI = 101
• MTU = 1492
• PPPoE
• Mux = LLC
• Line Type = Auto
• WAN IP = 0.0.0.0 (Your fixed WAN IP will be assigned upon login)
• DNS: 217.169.20.20 217.169.20.21 (2001:8b0::2020 and 2001:8b0::2021 for IPv6)