VMG1312-B10A: AAISP Configuration: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| Line 9: | Line 9: | ||
!Setting !!Note !!Date added |
!Setting !!Note !!Date added |
||
|- |
|- |
||
Configure WAN interface || (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) || 2015-02-01 |
| Configure WAN interface || (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) || 2015-02-01 |
||
|- |
|- |
||
Configure PPP settings as per the service || || 2015-02-01 |
| Configure PPP settings as per the service || || 2015-02-01 |
||
|- |
|- |
||
Configure DHCP || (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) || 2015-02-01 |
| Configure DHCP || (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) || 2015-02-01 |
||
|- |
|- |
||
Configure LAN subnet if line has a block of public IPs. || (else default is 192.168.1.1) || 2015-02-01 |
| Configure LAN subnet if line has a block of public IPs. || (else default is 192.168.1.1) || 2015-02-01 |
||
|- |
|- |
||
Configure WiFi || (Further Settings on Control Pages: SSID, Password or disable WiFi) || 2015-02-01 |
| Configure WiFi || (Further Settings on Control Pages: SSID, Password or disable WiFi) || 2015-02-01 |
||
|- |
|- |
||
Configure WiFi for 20Mhz instead of the 40Mhz default || (see [[VMG1312: WiFi Tips]]) || 2015-02-01 |
| Configure WiFi for 20Mhz instead of the 40Mhz default || (see [[VMG1312: WiFi Tips]]) || 2015-02-01 |
||
|- |
|- |
||
Configure WiFi for AES only (not legacy TKIP)|| || 2015-06-16 |
| Configure WiFi for AES only (not legacy TKIP)|| || 2015-06-16 |
||
|- |
|- |
||
Configure Firewall on/off || (Settings on Control Pages, Default=Enabled) || 2015-02-01 |
| Configure Firewall on/off || (Settings on Control Pages, Default=Enabled) || 2015-02-01 |
||
|- |
|- |
||
Configure TR-069 so the router can be managed by AAISP || (we give customer the same controls as staff get) || 2015-02-01 |
| Configure TR-069 so the router can be managed by AAISP || (we give customer the same controls as staff get) || 2015-02-01 |
||
|- |
|- |
||
Configure Local logging (on router) to log: System, PPPoE, XDSL, Internet, Attack, Account. (added 2015-05-29) |
| Configure Local logging (on router) to log: System, PPPoE, XDSL, Internet, Attack, Account. (added 2015-05-29) |
||
|- |
|- |
||
Add a Firewall rule to allow ICMPv6 || ||2015-06-16 |
| Add a Firewall rule to allow ICMPv6 || ||2015-06-16 |
||
|- |
|- |
||
Disable NAT, if customer has a public IP block || || 2015-02-01 |
| Disable NAT, if customer has a public IP block || || 2015-02-01 |
||
|- |
|- |
||
Disable SNMP || || 2015-02-01 |
| Disable SNMP || || 2015-02-01 |
||
|- |
|- |
||
Disable 3G backup || || 2015-02-01 |
| Disable 3G backup || || 2015-02-01 |
||
|- |
|- |
||
Disable 'DoS Protection Blocking' || as it does odd things, like blocking WebUI over WiFi || 2015-06-16 |
| Disable 'DoS Protection Blocking' || as it does odd things, like blocking WebUI over WiFi || 2015-06-16 |
||
|- |
|- |
||
Change NTP servers || to be time.aa.net.uk and 0.uk.pool.ntp.org || 2015-02-01 |
| Change NTP servers || to be time.aa.net.uk and 0.uk.pool.ntp.org || 2015-02-01 |
||
|- |
|- |
||
Change 'supervisor' password || (Setting on Control Pages) || 2015-02-01 |
| Change 'supervisor' password || (Setting on Control Pages) || 2015-02-01 |
||
|- |
|- |
||
Change 'admin' password || (Setting on Control Pages) || 2015-02-01 |
| Change 'admin' password || (Setting on Control Pages) || 2015-02-01 |
||
|- |
|- |
||
Change Remote Management Options || (Further Settings on Control Pages) || 2015-02-01 |
| Change Remote Management Options || (Further Settings on Control Pages) || 2015-02-01 |
||
|- |
|- |
||
Change QoS || to give upstream priority based on 'Packet Length' (See: [[VMG1312: QoS]]) || 2015-02-01 |
| Change QoS || to give upstream priority based on 'Packet Length' (See: [[VMG1312: QoS]]) || 2015-02-01 |
||
|- |
|- |
||
Change 'Deny Ping Response' to Disable, || to allow the router to reply to ping. || 2015-02-01 |
| Change 'Deny Ping Response' to Disable, || to allow the router to reply to ping. || 2015-02-01 |
||
|- |
|- |
||
Disable the default QoS Classes || (See: [[VMG1312: QoS]]) || 2015-02-01 |
| Disable the default QoS Classes || (See: [[VMG1312: QoS]]) || 2015-02-01 |
||
|- |
|- |
||
Remove the default read-only zyuser user || || 2015-02-01 |
| Remove the default read-only zyuser user || || 2015-02-01 |
||
|} |
|} |
||
Revision as of 09:01, 17 Haziran 2015
AAISP configure routers via TR-069 protocol. We generate a config file and this is sent to the router. Firmware updates are also able to be sent to the router.
Customers are free to alter the configuration as supplied, sending a configuration from the Control Pages will overwrite any settings changed though.
Here is an overview of the settings that are modified from the default:
| Setting | Note | Date added |
|---|---|---|
| Configure WAN interface | (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) | 2015-02-01 |
| Configure PPP settings as per the service | 2015-02-01 | |
| Configure DHCP | (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) | 2015-02-01 |
| Configure LAN subnet if line has a block of public IPs. | (else default is 192.168.1.1) | 2015-02-01 |
| Configure WiFi | (Further Settings on Control Pages: SSID, Password or disable WiFi) | 2015-02-01 |
| Configure WiFi for 20Mhz instead of the 40Mhz default | (see VMG1312: WiFi Tips) | 2015-02-01 |
| Configure WiFi for AES only (not legacy TKIP) | 2015-06-16 | |
| Configure Firewall on/off | (Settings on Control Pages, Default=Enabled) | 2015-02-01 |
| Configure TR-069 so the router can be managed by AAISP | (we give customer the same controls as staff get) | 2015-02-01 |
| Configure Local logging (on router) to log: System, PPPoE, XDSL, Internet, Attack, Account. (added 2015-05-29) | ||
| Add a Firewall rule to allow ICMPv6 | 2015-06-16 | |
| Disable NAT, if customer has a public IP block | 2015-02-01 | |
| Disable SNMP | 2015-02-01 | |
| Disable 3G backup | 2015-02-01 | |
| Disable 'DoS Protection Blocking' | as it does odd things, like blocking WebUI over WiFi | 2015-06-16 |
| Change NTP servers | to be time.aa.net.uk and 0.uk.pool.ntp.org | 2015-02-01 |
| Change 'supervisor' password | (Setting on Control Pages) | 2015-02-01 |
| Change 'admin' password | (Setting on Control Pages) | 2015-02-01 |
| Change Remote Management Options | (Further Settings on Control Pages) | 2015-02-01 |
| Change QoS | to give upstream priority based on 'Packet Length' (See: VMG1312: QoS) | 2015-02-01 |
| Change 'Deny Ping Response' to Disable, | to allow the router to reply to ping. | 2015-02-01 |
| Disable the default QoS Classes | (See: VMG1312: QoS) | 2015-02-01 |
| Remove the default read-only zyuser user | 2015-02-01 |
- Static routes are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though.
This list may not be exhaustive, and may change over time.