DGA0122 Bridge Mode

Back up to the Technicolor_DGA0122 Page
From AAISP Support Site
Revision as of 12:52, 15 March 2021 by AA-Andrew (talk | contribs)


Bridge settings
Status boxes once Bridge mode is set

The DGA0122 can be configured manually to be a bridge.

  1. Reset the router, but keep the DSL cabl;e disconnected for the moment, as otherwise it may get auto-configured by A&A.
  2. Connect computer to one of the LAN ports, and it should obtain an IP address in the 192.168.1.x range
  3. Log in to the admin pages via http://192.168.1.1 - use admin and the Access Password from the base of the unit
  4. click the i icon in the top.left 'System Info' box
  5. Click the 'Configuration' tab
  6. Scroll down and click the 'Setup your Gateway' button
  7. Select the Type (ADSL or VDSL) as appropriate
  8. Set the 'Routed type' to Bridge
  9. Other settings should all be OK as default
  10. Click Save

In Bridge mode, only LAN ports 1-3 will be bridged - connect your PPPoE router to one of these ports. Port 4 and the WiFi will be used to access the device itself only. You may choose to disable the WiFi and change the LAN IP details as you wish.

Retrieved from ‘http://support.aa.net.uk/index.php?title=DGA0122_Bridge_Mode&oldid=14933’