VMG1312-B10A: AAISP Configuration
AAISP configure routers via TR-069 protocol. We generate a config file and this is sent to the router. Firmware updates are also able to be sent to the router.
Customers are free to alter the configuration as supplied, sending a configuration from the Control Pages will overwrite any settings changed though.
Here is an overview of the settings that are modified from the default:
| Setting | Note | Date added | |
|---|---|---|---|
| Configure WAN interface | (Further Settings on Control Pages: ADSL/FTTC, Bridge or WAN on port 4 (FTTP)) | 2015-02-01 | |
| Configure PPP | settings as per the service | 2015-02-01 | |
| Configure DHCP | (Further Settings on Control Pages, Default=All IPs using AAISP DNS servers or as set on Control Pages) | 2015-02-01 | |
| Configure LAN subnet | if line has a block of public IPs. (else default is 192.168.1.1) | 2015-02-01 | |
| Configure WiFi | Further Settings on Control Pages: SSID, Password or disable WiFi | 2015-02-01 | |
| Configure WiFi for 20Mhz | instead of the 40Mhz default see VMG1312: WiFi Tips | 2015-02-01 | |
| Configure WiFi for AES only | not legacy TKIP | 2015-06-16 | |
| Configure Firewall on/off | (Settings on Control Pages, Default=Enabled) | 2015-02-01 | |
| Configure TR-069 | so the router can be managed by AAISP (we give customer the same controls as staff get) | 2015-02-01 | |
| Configure Local logging | (on router) to log: System, PPPoE, XDSL, Internet, Attack, Account. | 2015-05-29 | |
| Add a Firewall rule to allow ICMPv6 | 2015-06-16 | ||
| Disable NAT | if customer has a public IP block | 2015-02-01 | |
| Disable SNMP | 2015-02-01 | ||
| Disable 3G backup | 2015-02-01 | ||
| Disable 'DoS Protection Blocking' | as it does odd things, like blocking WebUI over WiFi | 2015-06-16 | |
| Change NTP servers | to be time.aa.net.uk and 0.uk.pool.ntp.org | 2015-02-01 | |
| Change 'supervisor' password | Setting on Control Pages | 2015-02-01 | |
| Change 'admin' password | Setting on Control Pages | 2015-02-01 | |
| Change Remote Management Options | Further Settings on Control Pages | 2015-02-01 | |
| Change QoS | to give upstream priority based on 'Packet Length' See: VMG1312: QoS | 2015-02-01 | |
| Change 'Deny Ping Response' to Disable, | to allow the router to reply to ping. | 2015-02-01 | |
| Disable the default QoS Classes | (See: VMG1312: QoS) | 2015-02-01 | |
| Remove the default read-only zyuser user | 2015-02-01 |
- Static routes are currently not configured. (Only applicable if you have multiple public IP blocks and need them routed to a secondary router. These can be configured manually though.
This list may not be exhaustive, and may change over time.