VMG1312-B10A: Factory Reset

To 'factory' reset the router, follow these steps:

1. Switch router on, wait for it to boot up
2. With a paperclip, pen, etc, hold in the reset button
3. Wait until the power light turns red (should be up to 10 seconds)
4. Release the reset button
5. Wait for the router to boot up again

Factory reset state

The factory reset state is the state the router was in when we sent it to you. In most cases that will mean is has been given our 'standard' configuration. This configuration has settings for it to talk back to AAISP and request it's own configuration for the line that it's connected to.

• For more information about the AAISP configuration see: VMG1312-AAISP Configuration

A factory reset router will also be send an updated firmware if there is one available.