ASUS RT-AC68U Intial Setup

From AAISP Support Site
Revision as of 23:56, 14 March 2017 by Reedy (talk | contribs) (→‎ASUS-RT-AC68U Initial Setup: clean up, typos fixed: Advertisment → Advertisement)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

ASUS-RT-AC68U Initial Setup

Initial setup is completely painless: after connecting the Openreach VDSL modem to the WAN port, the quick setup utility works out of the box, detects PPPoE automatically and requests the user/password setting. This is followed by WLAN parameters and a suggested firmware upgrade, then everything is set.

By default IPv6 support is switched off, but it can be easily enabled in the web interface.

In firmware version 3.0.0.4.380_3831 the "native" IPv6 setting (using the PPP option) didn't quite work out. It automatically obtained my allocated /64 prefix alright and distributed it to my LAN, but had no default IPv6 gateway set. You can verify this in "System Log/IPv6".

Setting the IPv6 connection type to Static IPv6 solves the problem. The individual settings on the IPv6 page that worked are:

  • Connection type: Static IPv6
  • Interface: PPP
  • WAN IPv6 Address: 2001:8b0:1111:1111:0:ffff:nnnn:nnnn (nnnn:nnnn is your static IPv4 address in hex)
  • WAN prefix length: 128
  • WAN IPv6 Gateway: fe80::xxxx:xxxx:xxxx:xxxx
  • (The gateway address can be found in the main system log: look for
  • "remote LL address" in one of the pppd log entries.)
  • LAN IPv6 address: [your /64 prefix followed by ::1]
  • LAN prefix length: 64
  • Auto Configuration Setting: Stateless
  • DNS servers: 2001:8b0::2020 / 2001:8b0::2021
  • Enable Router Advertisement: Enable
Retrieved from ‘http://support.aa.net.uk/index.php?title=ASUS_RT-AC68U_Intial_Setup&oldid=11951’