Help Choosing A Router

What would AAISP recommend as a router/Modem?

AAISP customers are free to use their own routers if they wish. This is a table of the routers/modems that AAISP sell, and their features:

	ZyXEL VMG1312-T20B	Technicolor DGA0122	FireBrick 2900
Summary	(T20B for short!) A consumer grade router which ideal for home use or for small offices. Different or additional hardware may be more suitable for larger or more complex networks, larger offices or to cover a larger area with WiFi access.	(T'Color for short!) Our higher specification standard router.	The FireBrick 2900 is a router, bonding box and traffic shaper. It can act as a SIP PBX, VPN tunnel endpoint and concentrator. Most commonly it is used as a general purpose network appliance in office environments, or for customers that would like to bond 2 or more circuits.	Specs	4 port, wifi, FTTC, ADSL, Bridge modem	PPPoE Bridge Modem, ADSL	4 port Ethernet Router/Firewall etc.
Ideal for:	Home use Small office All-in-one unit	Use with a your own PPPoE router/firewall Can do full 1500 byte MTU over PPPoE, which the ZyXEL can't in bridge mode	Flexible and feature-packed router Advanced features such as 3G fallback, bonding etc.
Not so good points for:	FTTP G.FAST Plugging in to a Modem (there is no Ethernet WAN port) WiFi is 2.4 GHz only	Steeper learning curve, as you'd probably expect from a router of this level (but A&A can help support)
Configured by AAISP			Sometimes an extra charge is applied
ADSL/ADSL2+			Will require a Modem, such as the DLINK
FTTC
Ethernet Service
Use with your own PPPoE router (Bridge mode)		We prefer the DLINK as a bridge due to MTU limitations (they drop packets above 1504 bytes)
Built in WiFi
Native IPv6		n/a (as used as a bridge)
Built in FireWall
Notes	Wiki Category	Wiki Page Only use as a 'bridge'	Wiki Category

Typical Scenarios

Or, maybe these typical scenarios will help you decide:

Your Scenario	Our Suggestion
I'm a home user, wanting wifi and wired connections for ADSL or FTTC, or just needing a VSDL modem for my own PPPoE router:		ZyXEL VMG 1312
I have my own routerboard or similar router with ADSL		DLINK DSL 320B. In bridge mode, your router can then talk PPPoE to it.
I'd like to do bonding with ADSL/FTTC/FTTP		FireBrick 2700 Use alongside a DLINK modem if you have ADSL, or the ZyXEL 1312 if you have FTTC lines.

You can always use your own equipment, that's fine too!