12,271
edits
Line Diagnostics: Difference between revisions
m
→Run PSTN Test
m (→Run PSTN Test) |
m (→Run PSTN Test) |
||
|
WLR3Test WLR3_CIDT_Test rds089a006:240514264:
Pass Line Test OK. Dial tone OK ServiceLevel:2, MainFaultLocation:OK, FaultReportAdvised:N, AppointmentRequired:N, LineStability:Stable, NetworkStability:Stable, StabilityStatement:Stable - no adverse line test history. CP may request an Engineer visit to investigate, test and demonstrate with the EU.
Routine test & fault data available at Customer Diagnostic Tool on INFORMe under MIS>Artisan>CDT. ▼
If no fault is found clear RWT and apply Time Related Charges.▼
▲Routine test & fault data available at Customer Diagnostic Tool on INFORMe under MIS>Artisan>CDT.
▲If no fault is found clear RWT and apply Time Related Charges.
If a fault is Fault Report is Advised it is a good idea to run the test again with equipment unplugged from the line. If the results suggest a fault at the Customer Equipment then try removing the NTE faceplate which will remove any internal wiring and see if it still says there is a fault.
| |||