Slow ADSL Diagnostics: Difference between revisions

From AAISP Support Site
mNo edit summary
(→‎top: clean up)
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
The tests to run when looking at a slow ADSL line are:
The tests to run when looking at a slow ADSL line are:


*[[Slow_ADSL_CQM| CQM Graphs]] From the previous step...
*[[Slow ADSL CQM|CQM Graphs]] From the previous step...
*[[Copper Line Tests]] will test the phone line for faults, and may report a fault is found.
*[[Copper Line Tests]] will test the phone line for faults, and may report a fault is found.
*[[Status Tests]] will show sync speed as well as if the line is below the Fault Threshold.
*[[Status Tests]] will show sync speed as well as if the line is below the Fault Threshold.
*[[BT ADSL Line Profiles|SNR Reset]] If you have recently had some sort of fault fixed, then the profile (BT lines) may need to be reset. This can be done via the control pages.


[[Category:Slow ADSL|4]]
[[Category:Slow ADSL|4]]

Latest revision as of 00:20, 18 August 2018

The tests to run when looking at a slow ADSL line are:

  • CQM Graphs From the previous step...
  • Copper Line Tests will test the phone line for faults, and may report a fault is found.
  • Status Tests will show sync speed as well as if the line is below the Fault Threshold.
  • SNR Reset If you have recently had some sort of fault fixed, then the profile (BT lines) may need to be reset. This can be done via the control pages.