VoIP Phones - Grandstream HT8xx: Difference between revisions

VoIP Phones - Grandstream HT8xx (view source)

Revision as of 11:54, 14 November 2020

288 bytes added , 14 November 2020

m

Doesn't seem to support SLAAC

Adsb

editor

471

edits

Revision as of 16:33, 29 November 2018 (view source) Adsb (talk \| contribs) m (Raised a support ticket with Grandstream about the lack of IPv6 support for white/black lists) ← Older edit		Revision as of 11:54, 14 November 2020 (view source) Adsb (talk \| contribs) m (Doesn't seem to support SLAAC) Newer edit →
(2 intermediate revisions by 2 users not shown)
You can set up distinctive ring tones based on the calling number, and it even allows matching on part of a number. I use '020836xxxxx' to match calls from a number of exchanges on the northern edge of London (which is where your author lives). ==IPv6 Only== I finally bit the bullet and configured the unit for IPv6 only. It needs to know about IPv6 DNS and NTP servers, and would need to use an IPv6 syslog server if that service is required, but it just works. Note that the options for getting its IPv6 address are DHCPv6 or static config - it doesn't seem able to use SLAAC. ==Firewall & Security== You will also want to set up firewall rules, as per the [[VoIP Firewall]] page. Also see the [[VoIP Security]] page for information about securing your VoIP service. *You can have an IP address ~~whitelist~~allow list and ~~blacklist~~block list for web, telnet, and ssh access to the ATA. Unfortunately it only accepts IPv4 address ranges (I have a support ticket open with Grandstream about this). ''Basic Settings'', ''Web/SSH Access''~~, ''White List for WAN Side'', similar for blacklist~~. [[Category:VoIP Phones\|Grandstream]]