VoIP - Recording Calls: Difference between revisions

Line 45:

button, one of the general purpose buttons can be re-programmed to be a record button (as for help if needed).

#Pressing the record button the first time will turn "on" recording,

#Pressing the record button the first time will turn "on" recording, which is somewhat pointless as recording is already on - all that happens is a round record icon comes on the screen.

#Pressing a second time turns "off" call recording, removing the icon. As recording is being turned off you also get a low beep when you press it this time, and so does the other person.

which is somewhat pointless as recording is already on - all that

#If you press again, it starts another call recording and give a high beep, you can repeat starting and stopping of recording as necessary. This means that, if you are part way through a call, and want to stop

happens is a round record icon comes on the screen.

⚫

recording, you press the record button twice, i.e. until it beeps and the icon goes away.

#Pressing a second time turns "off" call recording, removing the icon.

As recording is being turned off you also get a low beep when you press

it this time, and so does the other person.

#If you press again, it starts another call recording and give a high

beep, you can repeat starting and stopping of recording as necessary.

This means that, if you are part way through a call, and want to stop

⚫

recording, you press the record button twice, i.e. until it beeps and

the icon goes away.

To set this up on your phone you need to configure the phone to send a SIP 'record' message, for example, on a SNOM phone, this is done under the 'Function Key' settings.