Category:Technicolor DGA4134: Difference between revisions

DGA4134

These pages are about the Technicolor DGA4134.

DGA0122 and DGA4134

AAISP started selling the DGA0122 in December 2020. Supply problems (Due to Brexit) did mean a lack of stock in January 2021 and the DWA0120 was supplied as an alternative. The two are similar, so rather than having separate pages for the two models, we're combining the information for both here.

Basic Specs

• 4x 10/100M/1G LAN ports
• 1x 1 GE WAN port
• Modem supports VDSL (FTTC) and ADSL/ADSL2+ (Not G.Fast)
• WiFi is:
  • 2.4GHz (2x2) Wi-Fi 6 (IEEE 802.11ax)
  • 5GHz (4x4) Wi-Fi 6 (IEEE 802.11ax)
• 2 FXS ports, for connecting an analogue phone to a VoIP account

User information

• Spec sheet: File:DGA4134-specsheet.pdf
• A&A Quick Start sheet: TBC

Suitable for:

• ADSL1, ADSL2+
• VDSL (FTTC)
• G.Fast - using the Ethernet WAN port connected to an existing G.FAST modem
• FTTP, FTTPoD - using the Ethernet WAN port to the fibre termination 'modem'

Bridge mode: The automatic A&A configuration will not configure these routers as 'bridge'. If you want to use your own PPPoE router. In this case our basic ZyXEL is a better choice, or you can configure it manually: https://support.aa.net.uk/DGA0122_Bridge_Mode

Admin and WiFi passwords

We ship the router with a basic configuration which is just enough to get the router to log in to us and fetch its full configuration for your line. There are settings on the control pane which can set the SSID, passwords etc, but until the router has been sent its full configuration it is in an 'unconfigured' state.

Bugs & workarounds

Sadly, CPE has always had some quirks or bugs. We've identified a couple of problems with the DGA4134 and have listed them here: