TalkTalk Wholesale Line Tests

On TalkTalk Wholesale lines there are various line tests that can be run. Not all exchanges have the TAM module installed so for a few lines theses tests may not run successfully.

Get Sync Status

This will return the current sync status of the line

Example result:

OperStatus: Activating - Line not in sync, but is trying to get sync UP - Line is in sync

TAM

The TAM test runs testing on the copper circuit. This task takes about 3 minutes to run.

After Running the test, go back can select to view the results.

Example result:

GetLineData

This will retrieve a history of the line, up to 7 days at most.

Example result:

GetSpeedTestResults

This will display the historical speed tests for the line when using TalkTalk's speed tester at internet-speedtest.net. When you use this tester be sure to put your number in the box at the end without spaces. TalkTalk would like you to run the test at least 3 times, at various times of the day.

The speedtest button on the control pages will take you to the test page.

Example result:

The speed figures are in Kb/s...