Jump to content

This is the support site for Andrews & Arnold Ltd, a UK Internet provider. Information on these pages is generally for our customers but may be useful to others, enjoy!

VMG1312-B10A: Factory Reset: Difference between revisions

← Older editNewer edit →
Content deleted Content added
Adsb (talk | contribs)
editor
520 edits
m Be consistent about "Base Settings"
Adsb (talk | contribs)
editor
520 edits
m Minor changes
Line 41: Line 41:
==Reset to the ZyXEL Factory Settings==
==Reset to the ZyXEL Factory Settings==


To erase the default AAISP settings, the 'ROM-D' needs to be cleared, this is done via the CLI (Telnet or SSH) using the supervisor user and then issuing the <syntaxhighlight inline enclose="none">save_default clean</syntaxhighlight> command.
To erase the default AAISP settings, the 'ROM-D' file needs to be cleared, this is done via the CLI (Telnet or SSH) using the supervisor user and then issuing the <syntaxhighlight inline enclose="none">save_default clean</syntaxhighlight> command.


Here is an example:
Here is an example:
Line 57: Line 57:
</syntaxhighlight>
</syntaxhighlight>


At this point you can reset the router for this to be applied. The router will then boot up in it's original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.
At this point you can reset the router for this to be applied. The router will then boot up in its original factory settings without any of the AAISP configuration settings. You can reset the router by holding in the reset button for 5 seconds.


In this state, the router has its default IP address, username and password.
In this state, the router has ZyXEL's default IP address, username and password.


=Adding the AAISP rom-d file=
=Adding the AAISP rom-d file=
Retrieved from "http://support.aa.net.uk/VMG1312-B10A:_Factory_Reset"