Search results
- If you are using a firewall or NAT router with short timeouts on UDP sessions you can force packets to be sent ...gister. It re-registers every 120 seconds by default anyway so should keep NAT sessions open.8 KB (1,163 words) - 16:02, 10 December 2023
- The problem is that the default config leaves NAT turned on even when you are using real IPv4 addresses and it's not needed w To get around this NAT has to be fully turned off with the CLI command10 KB (1,696 words) - 00:18, 18 August 2018
- ...g that you have a connection with only one IPv4 address and will configure NAT, and one assuming you have a block of IPv4 allocated by A&A that you wish t * NAT for IPv417 KB (2,744 words) - 10:56, 13 September 2020
- | LAN IP || As advised || If using NAT then this will be some default such as 192.168.1.254. If you have a block o | LAN IP || As advised || If using NAT then this will be some default such as 192.168.1.254. If you have a block o10 KB (1,748 words) - 16:22, 22 February 2023
- ...ss to 192.168.1.1/24. If you have a larger block assigned, it will disable NAT, and set the router's address to the first usable in that block, and set th5 KB (909 words) - 14:27, 7 February 2019
- ...ss to 192.168.1.1/24. If you have a larger block assigned, it will disable NAT, and set the router's address to the first usable in that block, and set th5 KB (909 words) - 15:49, 28 February 2019
- ...ss to 192.168.1.1/24. If you have a larger block assigned, it will disable NAT, and set the router's address to the first usable in that block, and set th5 KB (909 words) - 14:29, 7 February 2019
- iptables -t nat -F # Masquerade (NAT)8 KB (1,318 words) - 22:59, 26 March 2022
- *No NAT2 KB (286 words) - 10:07, 23 March 2021
- =Separate (NAT) Subnet for the Dongle= ...SIMs access to the Internet, you will need a Route Override configured to NAT the traffic from the [[L2TP]] to your internet interface (in this case PPPo5 KB (974 words) - 13:35, 4 July 2024
- NAT can always be a problem with VoIP. SIP ALGs can get in the way by mangling2 KB (303 words) - 19:21, 18 September 2022
- * <tt>enp14s0</tt> in configured via NAT and/or DHCP to upstream ISP. L2TP shall connect through this No NAT/DHCP either. If local hosts want to firewall themselves, they can.15 KB (2,568 words) - 09:48, 10 June 2023
- nat { rule source-nat-rule {14 KB (1,190 words) - 00:03, 15 March 2017
- ...bnet to the WAN subnet. The Vigor has no routing table as such but pf can NAT you to it.6 KB (1,120 words) - 09:21, 25 February 2015
- *** Enable NAT if no public IPv4 (or preferably get public IPv4), Next *** Enable NAT if no public IPv4 (or preferably get public IPv4), Next6 KB (969 words) - 09:12, 16 April 2015
- ...ost cases AAISP can provide a block of IP4 addresses, so you don't need to NAT. That hopefully covers the basics. I've not included the NAT portion on the home lan/Orange adsl nor backup of the server lan via orange6 KB (1,158 words) - 09:29, 19 March 2018
- ...re a firewall for your system and also to apply some features such as IPv4 NAT for LAN. iptables -t nat -F32 KB (5,132 words) - 00:22, 18 August 2018
- ...directly in to the phone line (via a SSFP), and providing a firewalled, no-nat and DHCP connection to the LAN.3 KB (503 words) - 01:31, 11 December 2020
- *Passive mode FTP will be required if the user is '''behind a firewall or NAT''' (This will be an option in their FTP client)3 KB (624 words) - 14:22, 27 August 2024
- leftfirewall=yes # Yes as you may be behind firewall/NAT4 KB (548 words) - 13:41, 4 July 2022